![scarabgenomics/MDS™42 LowMut ΔrecA Chemically Competent Cell Kit/CurrencyDecimalSeparator:.,CurrencyGroupSeparator:,,CurrencyGroupSizes:[3],CurrencyNegativePattern:14,CurrencyPositivePattern:2,CurrencySymbol:$,NumberDecimalDigits:2,Nu](images/scarabgenomics/c-1000_1.png)
Background
Using synthetic biology methods, the Escherichia coli K-12 genome was reduced by making a series of planned, precise deletions. The multiple-deletion series (MDS™) strains (1), with genome reduction of up to 15%, were designed by identifying non-essential genes and sequences for elimination, including recombinogenic or mobile DNA and cryptic virulence genes, while preserving robust growth and protein production. Genome reduction also led to unanticipated beneficial properties, including high electroporation efficiency and accurate propagation of recombinant genes and plasmids that are unstable in other strains. Subsequent deletions and introduction of useful alleles produce strains suitable for many molecular biology applications. Recently, Scarab has built on the MDS™42 foundation strain, by creating the MDS™42 LowMut strain. It improves the already low mutation rate of the MDS™42 strain. The MDS™42 LowMut strain has been engineered to greatly reduce error-prone repair, which reduces the mutation rate to almost zero, even under the most stressful conditions, thus ensuring the most accurate replication of your plasmid.
Figures
Figure 1. MDS™42 LowMut has the Lowest Mutation Rate Under Stress. Mutation rates of various strains under unstressed and stressful conditions were determined. Stress conditions include overproduction of GFP, overproduction of a toxic peptide from pSG-ORF238 and treatment with mitomycin-C. All measurements were made using the cycA fluctuation assay, error bars represent 95% confidence intervals for the average of 3 independent measurements. BL21(DE3) failed to grow in the presence of 0.1 μg/ml mitomycin-C. ANOVA revealed a significance of p < 0.0001. Pairwise t-tests were conducted for each strain under a given condition compared to the corresponding MDS™42_lowmut strain.
Figure 2: Non-Expressing Plasmid Mutations Accumulate rapidly in BL21(DE3), When a Toxic Methyltransferase is Overproduced. SinI methyltransferase was expressed from pSin32. Plasmids were isolated at various intervals and screened (by transformation in McrBC+ and McrBC- hosts) for mutations resulting in loss of function of the enzyme. Error bars represent 95% confidence intervals for the average of 3 independent measurements of mutant plasmid ratios. ANOVA revealed a significance of p < 0.005. Pairwise t-tests of each MDS™42_lowmut_mcrBC sample were done with the corresponding MDS™42 mcrBC and BL21(DE3) mcrBC sample, respectively. Starting from 10 hours, all MDS™42_lowmut_mcrBC samples differed significantly from the MDS™42 mcrBC (p < 0.01) or BL21(DE3) mcrBC (p < 0.005) samples.
Figure 3: Multiple Deletion Strains tolerate "deleterious” genes. A chimeric gene composed of VP60 of rabbit hemorrhagic disease virus fused to the B subunit of cholera toxin (CTX) was very unstable in E. coli. Individually, both genes were stable in E. coli HB101, C600 and DH10B, but pCTXVP60 carrying the fusion gene in the same hosts did not produce fusion protein and was recovered in low yields. All recovered plasmids contained mutations in the CTXVP60 open reading frame, virtually all resulting from IS insertions. In contrast, the recombinant plasmid was completely stable in MDS™; normal yields of plasmid DNA were obtained. Representative restriction patterns of pCTXVP60. (A) Plasmid DNA from MDS™42 was transformed and propagated in the indicated host, then digested with NcoI and EcoRI. A representative of each restriction pattern was purified and sequenced. M, molecular weight marker, 1 kbp ladder; 1, MDS™41, no insertion; 2, MDS™42, no insertion; 3, DH10B, IS10 insertion; 4, DH10B, IS10 insertion/deletion; 5, C600, IS5 insertion; 6, C600, IS1 insertion; 7, C600, IS1 insertion. (B) Relative position of the IS element insertion sites in the CTXVP60 reading frame determined for the five examples presented.
Figure 4: Plasmid stability in different host strains. Left: during four subcultures of pT-ITR, a plasmid with viral LTR segments; Lane 0, isolated plasmid DNA before subculture, lanes 1-4, successive subcultures. Plasmid DNA was digested with restriction enzymes and analyzed by agarose gel electrophoresis. KpnI cuts the plasmid at a single site, but in MG1655 two bands indicate a deletion in the plasmid. MscI cuts at two locations, but in MG1655 a third intermediate band confirms that the plasmid is deleted. Right: Stability of four variants of a Lentiviral expression plasmid in MDS™42 ΔrecA and Stbl3™ (Life Technologies), showing the proportion of transformants containing intact plasmids (Table 2 BioTechniques 43:466-470 (October 2007))(2).
Specifications
Kit Components MDS™42 LowMut ΔrecA Chemically Competent Cells pUC19 Control DNA (10 pg/µl) SOC Medium Genotypes MG1655 multiple-deletion strain (1) ΔdinB ΔpolB ΔumuDC (2) ΔIS609 ΔpatD ΔydcV ΔydcU ΔydcT ΔydcS ΔydcR ΔhicA ΔhicB ΔyncJ ΔydcP ΔydcN ΔydcO ΔydcM ΔrecA(1819) The recA 1819 mutation is a deletion of recA Quality Control Transformation efficiency is tested using pUC19 control DNA, performed in duplicate. Transformed cells are plated on LB plates containing 50 μg/ml carbenicillin. Transformation efficiency is ≥1x108 cfu/μg DNA. Storage Conditions Store components at –80°C. Do not store cells in liquid nitrogen.
Related Products
White Glove IS Detection Kit
Support
Product Manuals MDS™42 LowMut ΔrecA Chemically Competent Cell Kit Papers
- Pósfai G, et al., (2006) Emergent properties of reduced-genome Escherichia coli. Science 312:1044-6.
- Csörgő et al. (2012) Low-Mutation-Rate, Reduced-Genome Escherichia coli an Improved Host for Faithful Maintenance of Engineered Genetic Constructs Microbial Cell Factories, 11:11.
- Chacko S. Chakiath, CS & Esposito, D (2007): Improved recombinational stability of lentiviral expression vectors using reduced-genome Escherichia coli. BioTechniques 43:466-470.
Patents & Disclaimers
Products are sold for non-commercial use only, under Scarab Genomics limited use label license: Limited Label Use.Scarab is providing you with this Material subject to the non-transferable right to use the subject amount of the Material for your research at your academic institution. The Recipient agrees not to sell or otherwise transfer this Material, or anything derived or produced from the Material to a third party. NO RIGHTS ARE PROVIDED TO USE THE MATERIAL OR ANYTHING DERIVED OR PRODUCED FROM THE MATERIAL FOR COMMERCIAL PURPOSES. If the Recipient makes any changes to the chromosome of the Material that results in an invention in breach of this limited license, then Scarab will have a worldwide, exclusive, royalty-free license to such invention whether patentable or not. If the Recipient is not willing to accept the terms of this limited license, Scarab is willing to accept return of this product with a full refund, minus shipping and handling costs. For information on obtaining a license to this Material for purposes other than research, please contact Scarab’s Licensing Department. Scarab Genomics’ technology is covered by U.S. Pat. No. 6,989,265 and related foreign applications. Clean Genome® is a registered trademark of Scarab Genomics, LLC.
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
1 mmol/LEDTA(pH 8.0)
因为含有以上两种物质,所以称为TE。
配制分三步:
1)1 M Tris-HCl (pH 8.0) 50 ml的配制:称取Tris碱6.06 g,加超纯水40 ml溶解,滴加浓HCl约2.1 ml调pH至8.0,定容至50 ml。
2)0.5 M EDTA(pH 8.0)50 ml的配制:称取EDTA-Na2·2H2O 9.306 g,加超纯水35 ml,剧烈搅拌,用约1 g NaOH颗粒调pH至8.0,定容至50 ml。(EDTA二钠盐需加入NaOH将pH调至接近8.0时,才会溶解。)
3)1×TE(10 mM Tris-HCl,pH 8.0;1 mM EDTA,pH 8.0)的配制:
作用:
TE缓冲液是弱碱性,对DNA的碱基有保护性,(DNA在它是的稳定性较好,不易破坏其完整性或产生开环及断裂),包括提取好的DNA也要放在TE缓冲液是保存. 10mMTris-Hcl,pH有7.47.68.0三种。
EDTA调到8.0是为了更好溶解,其他只要调到相应pH就可以。Tris在7-8附近缓冲能力很强,所以加8.0的EDTA下去后,不会改变pH。
TBST中含有Tris-Hcl,NaCl,Tween20这三种物质,是做WESTERNBLOT中常用的一种缓冲液。
TBST缓冲液的配制
1000ml×TBST的配置
先称量NaCl40g,倒入烧杯中,加DDW蒸馏水400ml,再称量NaCl47.6g,倒入刚才的那个烧杯中(PS:由于NaCl的量太多,一次称量不方便,所以分两次称量,且易于溶解)。往烧杯中加入Tris—HCl缓冲液100ml,最后加(吐温20)5ml,转入1000ml容量瓶中,在定容,转移即可。
TBST缓冲液的应用:
1.主要用于免疫组化和原位杂交,酶联免疫等实验中,清洗免疫印。
2.迹膜;
注意事项:
1.TBST缓冲液,PH7.2-7.5;
2.颜色为无色透明液体;
3.为了您的安全和健康,请穿实验服并戴防护手套操作;
1、组成成分:
A、1×TE缓冲液:10mmol/LTris.Cl;1mmol/LEDTA,pH8.0。
B、1×TAE缓冲液:40mmol/LTris-乙酸;2mmol/LEDTA,pH8.0。
C、1×TBE缓冲液:45mmol/LTris-硼酸;1mmol/LEDTA,pH8.0。
2、用途:
A、TE缓冲液:一般用作溶解剂或保持剂,常用于溶解DNA,能稳定储存DNA。
B、TAE缓冲液:生物学中使用最广泛的核酸电泳缓冲液,主要用于DNA的琼脂糖凝胶电泳。
C、TBE缓冲液:生物学中常用的核酸电泳缓冲液,主要用于DNA的琼脂糖凝胶电泳。
3、TAE和TBE缓冲液的选择:
TAE和TBE缓冲液都可以用于DNA的琼脂糖凝胶电泳,两者各有利弊,应根据实际情况选择不同的缓冲液。
4、注意:
TBE浓溶液长时间存放后会形成沉淀物,出现沉淀后应予以废弃。

