![SMOBIO/[QP4510] Q-PAGE™ TGN Precast Gel (Mini, 12 wells, 4-15%), 10 gels/Mini, 12 wells, 4-15%), 10 gels</span>
</li>
</ol>
</div>
<div class=col-sm-3 mb8>
<form method=get action=/sh](images/SMOBIO/image.png)
Description
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
Key Features
User-friendly gel cassette:
Numbered and framed wells for sample loading
Labeled warning sign and green tape as reminder
Enhanced gel performance:
Enhanced gel electrophoresis speed
Better band separation
Stable for shipping at ambient temperature
Easy compatibility:
Available as homogeneous and adjusted gradient gels for a wide range of protein separation.
Compatible with most popular protein electrophoresis systems
Storage and stability
Store Q-PAGE™ Precast Gels at 4°C for periods up to 12 months.
Do not freeze Q-PAGE™ Precast Gels. Remove tape and comb before electrophoresis.
Technical
Quick running, clear bands
Q-PAGE™ TGN Precast Gel can separate protein in 19 minutes using 300 V.
QP4510 Specifications
Gel | TGN(Tris-Glycine-Novel) | |
Buffersystems | Tris-Glycine (Laemmli) | |
Features | Quickrunning, clear bands | |
Cassettesize | Mini Gel (10 X 8.3 cm) | |
Gel dimensions
| 8.1 x 7.4 x 0.1 cm (W x L x thickness) cm | |
Electrophoresissystem | Bio-Rad systems | |
Well format& Capacity | 12 wells, 25 μl/well | |
Gelpercentage | 4-15 % | |
Accessorytray | Productiondescription Tip card Gel remover Cassetteopener | |
Manual
Manual_Q-PAGE™ TGN Precast Gel, Mini
SDS
SDS_Q-PAGE™ Precast Gel
Migration pattern
Setting Up and Running Q-PAGE™ Mini Precast Gel
Tips for removing Q-PAGE Mini Gel from cassette
Setting up gel/membrane sandwich for Western transfer
Recommendations/Tips for Gel Running
1. Remove comb and tape before adaption.
2. Use fresh 1X running buffer for the inner cathode chamber.
3. Rinse the wells before sample loading.
4. Try 200 V first, and optimize the voltage and running time if needed. Do not set voltage lower than 100 V.
Sample Preparation for SDS-PAGE
1. Mix protein sample with 2X sample buffer.
2. Heat the diluted samples at 95°C for 5 min or at 70°C for 10 min.
3. Cool the diluted samples to 4°C and spin down the water condensed on tube surface. (If there is high viscosity part at bottom of tube, transfer supernatant to a new tube.)
Prepare Q-PAGE™ for Sample Loading
1.Open the blister tray of Q-PAGE™ Precast Gel.
2.Briefly rinse the gel cassette with ddH2O.
3.Remove tape and comb; avoid squeezing the gel.
4.Adapt Q-PAGE™ to electrophoresis system; instruction are provided below. (BioRad Mini-PROTEAN® Core Electrophoresis System is recommended.)
5.Use a pipette to gently wash the wells with running buffer to remove residual storage buffer.
6.Fill the wells with running buffer prior to sample loading.
7.Load samples and pre-stained protein marker into numbered wells.
8.Fill both inner and outer chambers with running buffer to the highest level. Ensure gel wells are completely covered.
Power Setting for Running Q-PAGE™
Optimize the voltage and running time if needed.
| 150 V | 200 V*2 | 250 V*3 | 300 V*3 |
Running Time*1 | 40-60 mins | 30-40 mins | 25-35 mins | 15-25 mins |
Expected Current Initial (per gel) Final (per gel) |
40-50 mA 10-20 mA |
50-60 mA 25-30 mA |
80-90 mA 35-40 mA |
90-100 mA 40-50 mA |
Expected temperature | 25-30°C | 25-40 °C | 25-40°C | 25-40°C |
*1 Set voltage higher than 100 V is recommended
*2 Try 200 V first, and optimize the voltage and running time if needed.
*3For higher voltage conditions, please use fresh running buffer for inner and outer chambers
*4 Running time varies depending on gel percentage, running buffer, temperature, and power supply.
Remove Q-PAGE™ Gel from Cassette
Open cassette immediately after electrophoresis. Avoid gel drying.
1.Insert the cassette opener into corners of cassette.
2.Sequentially pry the opener to separate the two plates.
3.Gently pull two plates apart from the top of cassette.
4.Carefully detach the gel either from the bottom or the top side of the cassette.
-Avoid diagonally peeling the gel from the corner.
-Use water to help gel detachment if needed.
5.Gently remove the gel for further staining or Western blotting.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Q-PAGE™ Precast Gel
Gel Type | Bis-Tris | TGN (Tris-Glycine-Novel) | ||||||
Buffer systems | MOPS and MES | Tris-Glycine (Laemmli) | ||||||
Features | Clear and sharp bands, high resolution | Quick running, clear bands | ||||||
Cassette size | Mini Gel(10 x 8.3 cm) | Midi Gel(10 X 10 cm) | Mini Gel(10 x 8.3 cm) | Midi Gel(10 X 10 cm) | ||||
Electrophoresis system | Bio-Rad systems | Mini Gel Tank Xcell SureLock, Hoefer SE260 | Bio-Rad systems | Mini Gel Tank Xcell SureLock, Hoefer SE260 | ||||
Well format & Capacity | 12 wells, 25 μl/well | 15 wells, 22 μl/well | 12 wells, 40 μl/well | 15 wells, 28 μl/well | 12 wells, 25 μl/well | 15 wells, 22 μl/well | 12 wells, 40 μl/well | 15 wells, 28 μl/well |
Gel percentage/ Cat. No. | 8% | 8% | 8% | 8% | 10% | 10% | 10% | 10% |
QP2110 | QP2120 | QP3110 | QP3120 | QP4210 | QP4220 | QP5210 | QP5220 | |
12% | 12% | 12% | 12% | 4-15% | 4-15% | 4-15% | 4-15% | |
QP2310 | QP2320 | QP3310 | QP3320 | QP4510 | QP4520 | QP5510 | QP5520 | |
4-12% | 4-12% | 4-12% | 4-12% |
|
|
|
| |
QP2510 | QP2520 | QP3510 | QP3520 |
|
|
|
| |
ExcelBand™ Protein Markers
Ready-to-use— premixed with a loading buffer for direct loading, no need to boil
Broad range— 310 kDa to 5 kDa
Pre-stained bands — for monitoring protein separation during electrophoresis and Western blotting transferring efficiency on membrane
Enhanced bands— for quick reference
YesBlot™ Western Marker I
Ready-to-use — no need of mixing or heating before sample loading
Direct visualization — 10 IgG-binding proteins for direct visualization on Western blots
Pre-stained bands — 4 pre-stained proteins for monitoring protein separation during electrophoresis and Western blotting transferring efficiency on membrane
Wide range — 10 clear bands from 15 to 200 kDa for size estimation
Quick reference — two enhanced bands (30 and 80 kDa)
FluoroStain™ Protein Fluorescent Staining Dye
Compatible to MASS analysis — compatible to the analysis of mass spectra, such as LC-MS/MS, MALDI-TOF, and etc.
High sensitivity — detection level achieve ~3 ng, similar to silver staining
Substitution of the Coomassie Blue protein staining method
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
