ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
HBGF6; HST2; HST2 Oncogene; Heparin Secretory-Transforming Protein 2; Heparin-Binding Growth Factor 6
- Product No.SEA035Hu
- Organism SpeciesHomo sapiens (Human) Same name, Different species.
- All
- Human
- Mouse
- Rat
- Cavia
- Rabbit
- Simian
- Caprine
- Ovine
- Equine
- Bovine
- Porcine
- Gallus
- Canine
- Others
- Multi-species
- Pan-species
- Test MethodDouble-antibody Sandwich
- Assay Length3h
- Detection Range7.8-500pg/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 3.3pg/mL.
- Sample TypeSerum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
- DownloadInstruction Manual
- UOM48T96T96T*596T*1096T*100
- FOBUS$ 441 For more details, please contact local distributors!US$ 630 For more details, please contact local distributors!US$ 2835 For more details, please contact local distributors!US$ 5355 For more details, please contact local distributors!US$ 44100 For more details, please contact local distributors!
Packages (Simulation)- Packages (Simulation)
- Results demonstration
- Typical Standard Curve
- ISO9001: 2008, ISO13485: 2003 Registered
Specificity of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
This assay has high sensitivity and excellent specificity for detection of Fibroblast Growth Factor 6 (FGF6).No significant cross-reactivity or interference between Fibroblast Growth Factor 6 (FGF6) and analogues was observed.
Recovery of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
Matrices listed below were spiked with certain level of recombinant Fibroblast Growth Factor 6 (FGF6) and the recovery rates were calculated by comparing the measured value to the expected amount of Fibroblast Growth Factor 6 (FGF6) in samples.
| Matrix | Recovery range (%) | Average(%) |
| serum(n=5) | 83-99 | 95 |
| EDTA plasma(n=5) | 89-103 | 98 |
| heparin plasma(n=5) | 79-96 | 87 |
Precision of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Fibroblast Growth Factor 6 (FGF6) were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Fibroblast Growth Factor 6 (FGF6) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100 Intra-Assay: CV<10%>Inter-Assay: CV<12%>
Linearity of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Fibroblast Growth Factor 6 (FGF6) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
| Sample | 1:2 | 1:4 | 1:8 | 1:16 |
| serum(n=5) | 96-105% | 85-97% | 89-96% | 78-101% |
| EDTA plasma(n=5) | 88-97% | 80-95% | 97-105% | 84-104% |
| heparin plasma(n=5) | 80-95% | 89-96% | 94-103% | 81-105% |
Stability of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
1. Prepare all reagents, samples and standards;2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;4. Aspirate and wash 3 times;5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;6. Aspirate and wash 5 times;7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;8. Add 50µL Stop Solution. Read at 450nm immediately.
Test principle of the ELISA Kit for Fibroblast Growth Factor 6 (FGF6)
The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Fibroblast Growth Factor 6 (FGF6). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Fibroblast Growth Factor 6 (FGF6). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Fibroblast Growth Factor 6 (FGF6), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Fibroblast Growth Factor 6 (FGF6) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
GIVEAWAYS
ELISA / CLIA Experiment Service
INCREMENT SERVICES
Single-component Reagents of Assay KitLysis Buffer Specific for ELISA / CLIAQuality Control of ELISA / CLIAELISA Kit Customized ServiceDisease Model Customized ServiceSerums Customized ServiceTGFB1 Activation ReagentReal Time PCR Experimental ServiceStreptavidin
Related products
| Catalog No. | Organism species: Homo sapiens (Human) | Applications (RESEARCH USE ONLY!) |
| RPA035Hu01 | Recombinant Fibroblast Growth Factor 6 (FGF6) | Positive Control; Immunogen; SDS-PAGE; WB. |
| APA035Hu01 | Active Fibroblast Growth Factor 6 (FGF6) | Cell culture; Activity Assays. |
| PAA035Hu01 | Polyclonal Antibody to Fibroblast Growth Factor 6 (FGF6) | WB; IHC; ICC; IP. |
| LAA035Hu81 | FITC-Linked Polyclonal Antibody to Fibroblast Growth Factor 6 (FGF6) | WB; IHC; ICC; IF. |
| LAA035Hu71 | Biotin-Linked Polyclonal Antibody to Fibroblast Growth Factor 6 (FGF6) | WB; IHC; ICC. |
| MAA035Hu22 | Monoclonal Antibody to Fibroblast Growth Factor 6 (FGF6) | WB; IHC; ICC; IP. |
| SEA035Hu | ELISA Kit for Fibroblast Growth Factor 6 (FGF6) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| SCA035Hu | CLIA Kit for Fibroblast Growth Factor 6 (FGF6) | Chemiluminescent immunoassay for Antigen Detection. |
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
食品切片机适合切无骨肉类和其它类似榨菜带有弹性的食物，把原
材料肉切成肉片等,该机器结构紧凑、外形美观、操作简便、效率高、
耗电小、清洁保养容易、安全卫生，切肉效果均匀并可自动成卷状
，采用进口意大利刀片及皮带及带有独有自动润滑装置，功率强大,
是宾馆、酒家、食堂、肉类加工场等单位所不可缺少的肉类加工机
械。 餐饮业用的切片机有：牛羊肉切片等这些在市场上面常见到
的一些食品切片机。 比如参茸切片机是专门为参茸店、药房、诊所、家庭切制西洋参、鹿茸、天麻等参类药材设计的可切成斜片，横片，直片，片片厚薄均匀，色泽美观。刀盘上装放刀片四把,可任意调节厚薄.具有体积小、使用方便、切片美观、操作简单、质量稳定、使用寿命长等优点。适用于参类、植物的根茎及其它高贵药材的切片。
下面可以看下具体的参考资料 病理切片机：R139型轮转式石蜡切片机
主要性能指标:
1、流线形罩壳无需拆卸，清洁方便;顶部可移动托盘能放置标本盒等物件。
2、样品夹持系统可在三维轴上任意调节，使用方便。
3、彻底消除跳刀、厚簿不匀、沾刀、不连片等现象。
4、无论使用标准切片刀或一次性刀片都可以获得理想的切片效果。
5、原装进口微分进刀系统和终身免维护的十字交叉导轨，保障切片
6、精度和厚薄均匀。
7、配备可移动接屑盘，方便清洁。向左转|向右转
前段时间用了一下振动切片机，感觉要想准确的切出海马切片不太容易。然后搜索了一下，发现国外用McIlwaintissuechopper这种切片机的人也挺多的，而国内很多都是用的振动切片机。先上两张图
McIlwaintissuechopper
这种切片机的特点是从上向下竖直切下来，每切一次，下面的盘子移动一点点
振动切片机
这种切片机是水平切，将脑组织用502粘在那个小台子上切
两种切片机，我个人的理解是，上面那种可能要更好一点，对于振动切片机，组织块用502粘在小台子上，如果组织块比较大，下面一点点组织浪费也不要紧。但是如果我想切海马，先把海马剥离出来，然后再粘贴在振动切片机上，这样就没办法切了，海马体是个细长的结构，粘上去基本上就全浪费了（我看到很多国内文献都是用的振动切片机，先分离出海马体，然后再切，不知道他们是怎么解决这个问题的，在我看来，1到2周的乳大鼠，分离出的海马体是非常小的，再用胶水粘在小台子上，那都没得切了，不要告诉我说少涂掉胶水，这也解决不了根本问题）但是如果我平放在上面的组织切片机上，从上向下切，这样就没事，可以切出很多切片，完全不会浪费，但还是有个问题，上面那种切片机，虽然每切一次，下面的盘子移动一点距离，但脑组织毕竟是非常柔软的，会不会因为太柔软而不能切的均匀？放在冰水混合物中冻硬一点能不能解决这个问题？
家用的菜刀也叫切片机，工业用的医院切组织用的也叫切片机。
1:德国美康冰冻切片机：
德国美康HM550型冰冻切片机，使用双半导体致冷技术，切片机箱体制冷-35℃，快速制冷架一次可放12个样品，其中4个位点可降温至-60℃，样品头制冷可达-50℃。采用步进马达进样技术，切片厚度精度稳定，切片厚度范围：1-500微米。切片厚度的调整位于冷冻箱体之外便于操作。具有样品头位置记忆功能，切片计数功能，全自动化程序除霜功能，切片回缩功能，完全满足日常冰冻切片快速，精确，安全的需要。
2:徕卡切片机：
准确的诊断有赖于精确的切片。精确的切片依靠正确类型的切片机。徕卡开创了切片术的历史，不断提供各种系列的切片机，为各项应用供应高质量的切片。选择适用于您标本类型的徕卡切片机，树立诊断信心，给予患者更可信赖的保障。
3:切片机类型：
轮转式切片机：进行精确的手动、半自动化或全自动化切片。
平推式切片机：平推式切片机，平稳地制备组织或生物标本。
振动式切片机：在生理条件下进行切片。
4:切片机本身国产的跟进口的没什么区别，主要就体现在刀片上，我用的这款浩博切片机就是国产的机器配进口的刀片，很好使的，价格便宜了好多。
不同的切片机切片的方法也不同，比如试验中要处理细胞或者组织，从而方便用显微镜进行观察实验。用于光学显微镜的有旋转式和滑走式切片机
在造纸行业也需要用到切片机，适用刀盘式切片机，鼓式切片机，螺旋切片机等。刀盘式切片机由刀盘、机壳、喂料槽以及传动装置等部分组成，工作原理是利用沉重的刀盘起到飞轮的作用，稳定切片。
还有一种是将聚合物带条切成颗粒。这就需要一个特殊的切片机，这种切片机由导条板、喂入辊、加压辊、旋转刀盘组成。工作原理是：利用刀盘由无级变速器传动，喂入辊由刀盘通过一组变换齿轮传动，而刀盘按切粒尺寸装有多把刀片。可以自行调换变换齿轮可改变切断长度和无级变速器可改变带条的惟入速度。向左转|向右转
