Description
The Bellco Top Drive Roller Apparatus has been designed for production of animal cells, viruses and cell products. The unit accommodates 53 bottle positions with over 85,000 cm2 of surface area. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a chemical-resistant non-slip EDPM. All units incorporate a solid state control with a brushless motor and controller, providing smooth operation and easy maintenance. All units feature rubber bumpers, handles, a slotted rear guard, and All Position Drive. The All Position Drive is designed to accommodate plastic roller bottles by preventing the slipping of the light-weight bottles. An optional Motion Alarm System provides audible and visual alarms should the primary fail.
Specifications:
- Bottle Speed: 0.3 – 9.0 Rpm.
- Drive And Control System: Solid-State Electronic Control With Precision Full-Range Tachometer.
- Electrical Rating: 115 +/-10 Vac @ 60 Hz Line Voltage, 3.0 Amp @ 115v 60 Hz Power Consumption.
- Roller Shaft Construction: Non-Transferring Chemical-Resistant Rubber Rollers With Key-Shape.
- Dimensions: 76″H X 30″W X 25″D (193 X 76 X 63cm).
- Clearance Between Decks For Bottle Placement: 134 Mm.
- Construction Material: Aluminum, Enamel Finish.
- Usable Roller Length: 51 Cm.
- Environmental Conditions (Operating): Indoor Use, Pollution Degree 2, 4° To 50° C, Relative Humidity 0-90%, Non-Condensing,
- Environmental Conditions (Non-Operating): -10° To 60° C, Relative Humidity 95% Maximum.
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
请回答明确,谢谢
装置是这样的:旋转蒸发仪上的冷凝管的水直接流到真空泵里以冷却真空泵然后再从真空泵里流出来.
现在的问题是,我第一天清洗过真空泵之后,第二天再用就发现真空泵里的水已经有股臭味了,有没有什么好的办法可以让它不臭?这样每天都处理的话,太浪费时间了.如果哪位有什么好主意的话,请告知,谢谢!
要看清楚每个真空泵的真空度,选择使用。有必要时,自己测定一下其真空度,若与所写数值有差别时,请告知管理员。
使用时记得加冷阱,有必要时请对所蒸产品进行预处理。
使用结束后,先停止加入,并等体系冷却至室温,再放气,关泵,撤掉冷阱,千万不要弄反顺序。
如发现真空泵管道漏气时,请及时与管理员联系。
若是由于个人操作失误,导致真空泵损坏时,管理员有权停其使用权限,并让其负责维修。
本规定自贴出起生效,请大家遵守以上规定。

