Recombinant Fibroblast Growth Factor 6 (FGF6)
HBGF6; HST2; HST2 Oncogene; Heparin Secretory-Transforming Protein 2; Heparin-Binding Growth Factor 6
- Product No.RPA035Fi01
- Organism SpeciesDanio rerio (Zebrafish) Same name, Different species.
- All
- Human
- Mouse
- Rat
- Cavia
- Rabbit
- Simian
- Caprine
- Ovine
- Equine
- Bovine
- Porcine
- Gallus
- Canine
- Others
- Multi-species
- Pan-species
- SourceProkaryotic expression
- HostE.coli
- Endotoxin Level<1.0EU per 1µg (determined by the LAL method)
- Subcellular Locationn/a
- Predicted Molecular Mass17.7kDa
- Accurate Molecular Mass18kDa(Analysis of differences refer to the manual)
- Residues & TagsArg85~Ile209 with N-terminal His Tag
- Buffer FormulationPBS, pH7.4, containing 0.01% SKL, 1mM DTT, 5% Trehalose and Proclin300.
- TraitsFreeze-dried powder
- Purity> 97%
- Isoelectric Point9.8
- ApplicationsPositive Control; Immunogen; SDS-PAGE; WB.If bio-activity of the protein is needed, please check active protein.
- Downloadn/a
- UOM10µg50µg200µg1mg5mg
- FOBUS$ 164 For more details, please contact local distributors!US$ 410 For more details, please contact local distributors!US$ 820 For more details, please contact local distributors!US$ 2460 For more details, please contact local distributors!US$ 6150 For more details, please contact local distributors!
SEQUENCE of the Recombinant Fibroblast Growth Factor 6 (FGF6)
USAGE of the Recombinant Fibroblast Growth Factor 6 (FGF6)
Reconstitute in PBS or others.
STORAGE of the Recombinant Fibroblast Growth Factor 6 (FGF6)
Avoid repeated freeze/thaw cycles. Store at 2-8°C for one month. Aliquot and store at -80°C for 12 months.
STABILITY of the Recombinant Fibroblast Growth Factor 6 (FGF6)
The thermal stability is described by the loss rate. The loss rate was determined by accelerated thermal degradation test, that is, incubate the protein at 37°C for 48h, and no obvious degradation and precipitation were observed. The loss rate is less than 5% within the expiration date under appropriate storage condition.
GIVEAWAYS
Polyacrylamide Gel Electrophoresis (PAGE) Experiment Service
INCREMENT SERVICES
Endotoxin Removal KitBCA Protein Quantification KitProtein Labeling Customized ServiceMolecular Mass Marker for ProteinRecombinant Protein Customized ServiceMonoclonal Antibody Customized ServicePolyclonal Antibody Customized ServiceProtein Activity Test Experiment ServiceImmunoprecipitation (IP) Experiment ServiceBufferEndotoxin Removal Kit IIReal Time PCR Experimental ServiceSpike RBD Protein (S-RBD)Protein GProtein A
Related products
| Catalog No. | Organism species: Danio rerio (Zebrafish) | Applications (RESEARCH USE ONLY!) |
| RPA035Fi01 | Recombinant Fibroblast Growth Factor 6 (FGF6) | Positive Control; Immunogen; SDS-PAGE; WB. |
| PAA035Fi01 | Polyclonal Antibody to Fibroblast Growth Factor 6 (FGF6) | WB; IHC; ICC; IP. |
| MAA035Fi21 | Monoclonal Antibody to Fibroblast Growth Factor 6 (FGF6) | WB; IHC; ICC; IP. |
| SEA035Fi | ELISA Kit for Fibroblast Growth Factor 6 (FGF6) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| SCA035Fi | CLIA Kit for Fibroblast Growth Factor 6 (FGF6) | Chemiluminescent immunoassay for Antigen Detection. |
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
文章原文链接http://www.jbc.org/content/282/23/16776.long
本试验根据《中国药典》2015年版紫外分光光度法吸收系数法进行制定,本试验方法采用的方法学验证内容如下:
1.线性及范围
取IgG标准品配制5个不同浓度被测样品,并进行测定,绘制标准曲线,得到回归方程及范围。
2.准确度
已回收率对准确度进行验证。以已知含量的IgG标准品配制供试品,配制三个浓度,每个浓度平均测定三次。计算回收率。
3.精密度
IgG标准品配制供试品,平行测定六次。
4.溶液稳定性试验
至少持续2h的溶液稳定性考察。
5.干扰试验
空白溶液中加入辅料,在280nm处测定吸收,确定辅料是否对样品的吸收造成干扰。
以上,请大神指正。
补充问题,在专属性验证上,仅做辅料干扰是不是太少了?是否再进行强降解实验呢?因为其中包含了蛋白质A、外源性DNA及宿主细胞蛋白残留。我是否应该针对这三种杂质进行专属性试验?该如何进行呢?
问题分析:单纯疱疹是由单纯疱疹病毒感染引起的.单纯疱疹病毒最大的特点是,这种病毒很难被“斩尽杀绝”,总有一少部分病毒在体内潜伏下来,伺机作乱.这些病毒何时再次致病很难预料,一般情况下发热,情绪紧张,月经,妊娠等因素都可能引起发病或复发.发病后即使不经治疗,患者2--4周后也可自愈,只是部分病毒仍然潜伏在体内.目前对这种由单纯疱疹病毒引起的疾病,没有很好的药物治疗,发作时主要使用各种洛韦类抗病毒药,如阿昔洛韦等.主要还是要保持良好的情绪,避免劳累等.
指导建议:IGG和IGM是两种不同的免疫球蛋白,两者产生的先后顺序不一样,一般来说IGM阳性提示在急性感染期,IGG阳 性有可能与以前曾经有过感染有关的。aware可自测不用抽血祝您健康天 猫!
2-IgM也是一种特异性感染指标,但在人体内持续时间不长(有时是30天更短),往往是传染病的近期感染指标。呈阴性是指:你近期没有感染过结核杆菌。


