Rodent Warmer x2
Minimize heat loss and improve surgical outcome with the Rodent Warmer
Use Rodent Warmer X2 before, during and after surgical procedures to improve surgical outcome and overall longevity. The integrated touch screen allows for easy programming and controls 2 independent heating pads simultaneously. Available with a combination of mouse, rat or home-cage heating pads. Rectal Thermal probe sold separately.
Rodent Warmer X2 is ideal for use before, during or after surgical procedures. Warming the animal minimizes heat loss and improves surgical outcomes.
Control two independent heating pads simultaneously
Minimize heat loss and improve surgical outcomes with Rodent Warmer X2.
Features:
· Integrated touch screen for easy programming
· Controls two independent heating pads simultaneously
· Rectal probe (sold separately) for body temperature feedback
· Available with a combination of mouse, rat or cage size heating pads
Heating pads are constructed of silicone rubber heaters.
Temperature Control Range | 25-45°C |
Temperature Resolution | 0.1°C |
Heater Blanket Connection | 4-pin locking DIN |
Heater Power | 24VDC@3Amax |
Power Requirements | 120/240VAC (switchable), 50/60Hz, 75VA |
Probe Input Connector | Phone jack |
Probe Dimensions | 1.66mm/0.62in tip diameter |
Control Box Dimensions | 14cm (l) x 13cm (w) x 4cm (h) - 5.5in x 5in x 1.6in |
Control Box Weight | 380 grams (13.4 ounces) |
Mouse Heating Blanket Dimensions | 7 x 7cm (2.75in x 2.75in) |
Rat Heating Blanket Dimensions | 15.25 x 15.25cm (6in x 6in) |
Cage Heating Blanket Dimensions | 16 x 38cm (6.25in x 15in) |
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
多谢！
不知道能不能直接买到大鼠抗豚鼠血管IgG的ELISA试剂盒。
如果买不到这种试剂盒，用空白板的话（就是反应孔中没有抗原或者抗体包被），把自制的豚鼠血管抗原加到反应孔中进行孵育，能不能使抗原附着在孔壁上？这样的话就可以按照elisa的操作步骤进行大鼠血清检测了。
目前的设想是自制抗原，粉碎豚鼠的血管，制成悬液，通过反复多次的冻融，离心后收集上清液作为抗原（即豚鼠血管抗原）。
然后将抗原加入到elisa的反应孔中（这种是特制的空白板，就是反应孔中没有抗原或抗体包被）进行孵育，使豚鼠血管抗原附着在孔壁上，就是让反应孔充当固相载体，形成固相抗原。倒掉多余的抗原。
再加入待检测的大鼠血清，这样血清中的特异性抗豚鼠血管IgG就可以跟固相的抗原结合，形成固相抗原抗体复合物。
加入酶标的兔抗鼠或者羊抗鼠IgG,形成酶标的抗原抗体复合物。
然后就是一些显色步骤。
现在关键的问题就是抗原加入空白板，能不能形成固相抗原，如果不能跟孔壁附着的话，在后面洗涤的过程中就被洗掉了，那就没办法完成检测了。
请各位大侠给指条明路啊！！！小弟在此多谢了！！！
