
Format : | Purified |
Amount : | 100 µg |
Isotype : | Mouse IgG1, kappa |
Purification : | Purified Ab with BSA and Azide at 200ug/ml |
Content : | 200ug/ml of recombinant MAb purified by Protein A/G. Prepared in 1mM PBS with 0.05% BSA & 0.05% azide. Also available WITHOUT BSA & azide at 1.0mg/ml. |
Storage condition : | Store the antibody at 4°C; stable for 6 months. For long-term storage; store at -20°C. Avoid repeated freeze and thaw cycles. |
Gene : | GPC3 |
Gene ID : | 2719 |
Uniprot ID : | P51654 |
Alternative Name : | DGSX, Glypican proteoglycan 3, GPC3, GTR2-2, Heparan sulphate proteoglycan, Intestinal protein OCI-5, MXR7, OCI-5, SDYS, Secreted glypican-3, SGBS1 |
Immunogen Information : | Recombinant full-length human GPC3 protein |
MW : 67kDa; Positive Control : 293T cells or Hepatocellular carcinoma; Flow Cytometry (0.5-1ug/million cells); Immunofluorescence (0.5-1ug/ml); Immunohistology (Formalin-fixed) (0.5-1ug/ml for 30 minutes at RT),(Staining of formalin-fixed tissues requires boiling tissue sections in 1mM EDTA buffer, pH 7.5-8.5, for 10-20 min followed by cooling at RT for 20 minutes),Optimal dilution for a specific application should be determined.
For Research Use Only. Not for use in diagnostic/therapeutics procedures.
Subcellular location: | Cell membrane |
Post transnational modification: | Cleaved intracellularly by a furin-like convertase to generate 2 subunits, alpha and beta, which remain associated through disulfide bonds and are associated with the cell surface via the GPI-anchor (PubMed:14610063). This processing is essential for its role in inhibition of hedgehog signaling (PubMed:25653284). A second proteolytic event may result in cleavage of the protein on the cell surface, separating it from the GPI-anchor and leading to its shedding from the cell surface (PubMed:14610063). |
Tissue Specificity: | Highly expressed in lung, liver and kidney. |
BioGrid: | 108983.26 interactions. |
There are currently no product reviews Write a review on this product! |
Customers who purchased this product also purchased
Recombinant Mouse Monoclonal A...


Recombinant Mouse Monoclonal A...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant anti- human ErbB2/...


Recombinant Human PD-1 rabbit ...


Recombinant anti-human-IL-1 be...


Recombinant anti- human ErbB2/...


Anti-MFG Monoclonal Antibody (...


Mouse Monoclonal Antibody to I...

Recombinant Mouse Monoclonal A...


Recombinant Mouse Monoclonal A...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant Rabbit Monoclonal ...


Recombinant anti- human ErbB2/...


Recombinant Human PD-1 rabbit ...


Recombinant anti-human-IL-1 be...


Recombinant anti- human ErbB2/...


Anti-MFG Monoclonal Antibody (...


Mouse Monoclonal Antibody to I...

Most viewed Products

Recombinant Human Thioredoxin-Like ...


Monoclonal antibody to Human PD-L1 ...


Monoclonal Antibody to Human IL-1be...


Monoclonal Antibody to Caspase-3 (P...


Polyclonal Antibody to Beta actin


Monoclonal Antibody to GAPDH (Clone...


Monoclonal antibody to B7-H4 (Clone...


Polyclonal Antibody to Beta Tubulin


NF-kB Leeporter™ Luciferase Repor...


Peroxidase conjugated Goat anti Mou...

ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
磁珠如贴片磁珠,插件磁珠
他们都可能是同一种材质,非要区别那可能就是大小了 ,磁珠都非常的小,
电感多用于电源滤波回路,磁珠多用于信号回路,用于EMC对策磁珠主要用于抑制电磁辐射干扰,而电感用于这方面则侧重于抑制传导性干扰。两者都可用于处理EMC、EMI问题。磁珠是用来吸收超高频信号,象一些RF电路,PLL,振荡电路,含超高频存储器电路(DDR SDRAM,RAMBUS等)都需要在电源输入部分加磁珠,而电感是一种蓄能元件,用在LC振荡电路,中低频的滤波电路等,其应用频率范围很少超过错50MHZ。地的连接一般用电感,电源的连接也用电感,而对信号线则采用磁珠?
但实际上磁珠应该也能达到吸收高频干扰的目的啊?而且电感在高频谐振以后都不能再起电感的作用了,先必需明白EMI的两个途径,即:辐射和传导,不同的途径采用不同的抑制方法。前者用磁珠,后者用电感。对于扳子的IO部分,是不是基于EMC的目的可以用电感将IO部分和扳子的地进行隔离,比如将USB的地和扳子的地用10uH的电感隔离可以防止插拔的噪声干扰地平面?电感一般用于电路的匹配和信号质量的控制上。在模拟地和数字地结合的地方用磁珠。在模拟地和数字地结合的地方用磁珠。数字地和模拟地之间的磁珠用多大,磁珠的大小(确切的说应该是磁珠的特性曲线),取决于你需要磁珠吸收的干扰波的频率,为什么磁珠的单位和电阻是一样的呢??都是欧姆!!磁珠就是阻高频嘛,对直流电阻低,对高频电阻高,不就好理解了吗, 比如1000R@100Mhz就是说对100M频率的信号有1000欧姆的电阻,因为磁珠的单位是按照它在某一频率产生的阻抗来标称的,阻抗的单位也是欧姆。磁珠的datasheet上一般会附有频率和阻抗的特性曲线图。一般以100MHz为标准,比如2012B601,就是指在100MHz的时候磁珠的Impedance为600欧姆。
电感多用于电源滤波回路,磁珠多用于信号回路,用于EMC对策磁珠主要用于抑制电磁辐射干扰,而电感用于这方面则侧重于抑制传导性干扰。两者都可用于处理EMC、EMI问题。磁珠是用来吸收超高频信号,象一些RF电路,PLL,振荡电路,含超高频存储器电路(DDR SDRAM,RAMBUS等)都需要在电源输入部分加磁珠,而电感是一种蓄能元件,用在LC振荡电路,中低频的滤波电路等,其应用频率范围很少超过错50MHZ。地的连接一般用电感,电源的连接也用电感,而对信号线则采用磁珠?
但实际上磁珠应该也能达到吸收高频干扰的目的啊?而且电感在高频谐振以后都不能再起电感的作用了,先必需明白EMI的两个途径,即:辐射和传导,不同的途径采用不同的抑制方法。前者用磁珠,后者用电感。对于扳子的IO部分,是不是基于EMC的目的可以用电感将IO部分和扳子的地进行隔离,比如将USB的地和扳子的地用10uH的电感隔离可以防止插拔的噪声干扰地平面?电感一般用于电路的匹配和信号质量的控制上。在模拟地和数字地结合的地方用磁珠。在模拟地和数字地结合的地方用磁珠。数字地和模拟地之间的磁珠用多大,磁珠的大小(确切的说应该是磁珠的特性曲线),取决于你需要磁珠吸收的干扰波的频率,为什么磁珠的单位和电阻是一样的呢??都是欧姆!!磁珠就是阻高频嘛,对直流电阻低,对高频电阻高,不就好理解了吗, 比如1000R@100Mhz就是说对100M频率的信号有1000欧姆的电阻,因为磁珠的单位是按照它在某一频率产生的阻抗来标称的,阻抗的单位也是欧姆。磁珠的datasheet上一般会附有频率和阻抗的特性曲线图。一般以100MHz为标准,比如2012B601,就是指在100MHz的时候磁珠的Impedance为600欧姆。

