
Microarray Panel | Prostate adenocarcinoma (95 cases), 2 cases of NAT* and 3 cases of normal prostate tissue. 1 core/case. Gleason grade available. | |
Cores | 100 | |
Cases | 100 | |
Row number | 8 | |
Column number | 14 | |
Core Diameter (mm) | 1.5 | |
Thickness (µm) | 4 | |
Quantity Control | H&E and IHC confirmed | |
Tissue Array Type | FFPE | |
Species | Human | |
Applications | Routine histology procedures including Immunohistochemistry (IHC) and In Situ Hybridization (ISH), protocols which can be found at our support page. | |
Notes | 1. TMA slides were sectioned and stored at 4°C and may not be fresh cut, but still suitable for IHC. Please request fresh cut if experiment involves phospho-specific antibodies, RNA studies, FISH or ISH, etc. A minimum of 3 slides per TMA must be purchased to cover the cost of trimming for fresh sectioning.2. Most TMA slides were not coated with an extra layer of paraffin (tissue cores can be easily seen on the glass). To prevent tissue detachment during antigen retrieval, unbaked slides must be baked for at least 30 to 120 minutes at 60°C. before putting into xylene for de-paraffinization. Baked slides were sent out baked for 2 hours.In the following specsheet,“*” means invalid core; “-” means no applicable or negative in IHC markers. |
![]() |
| |||||||||||||||
A | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
B | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
C | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
D | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
E | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
F | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
G | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||
H | ![]() | ![]() |
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
我们使用了南京建成的胆固醇,甘油三酯和游离脂肪酸的试剂盒,样本为小鼠肝脏,试剂盒提供的步骤为使用生理盐水或者乙醇作为匀浆介质,3500rpm,10min;
然而我们发现生理盐水作为匀浆介质时,按此离心速度无法获得上清液;若加大离心速度以及延长离心时间,获得的上清液为白色,蛋白浓度检测出来浓度很高,效果十分不理想;若改为乙醇作为匀浆介质时,检测结果甘油三酯很高,游离脂肪酸浓度很低,不知是否涉及脂肪酯化的问题;
希望大家能给我提提建议,给点自己的妙招;或者是否有人提供好用的试剂盒?
1.我利用微乳法制备SLN,模型药物、三棕榈酸甘油酯、甘油、泊洛沙姆188,80度下融化,混合均匀,2000rpm搅拌状态下滴加1%PVA水相。冷却至室温时,表面有一层脂质析出。不断增加Lipid:surfacant的比例,当达到1:20时,当冷却至室温时,仍有脂质析出。
新人一枚,想问下各位大侠,有什么好的解决方案不?
在兔子上研究肝脏脂代谢,不知道什么细胞株合适,自己培养的担心不靠谱,不知道有没有做过这方面的,给提一些意见,感谢!

