请使用支持JavaScript的浏览器! Dojindo/Lipi-Series: Lipid Droplet Detection Probes/Lipi-Deep/LD01_蚂蚁淘,【正品极速】生物医学科研用品轻松购|ebiomall 蚂蚁淘商城
商品信息
联系客服
Dojindo/Lipi-Series: Lipid Droplet Detection Probes/Lipi-Deep/LD01
郑重提醒:
无质量问题不接受退换货,下单前请仔细核对信息。
下单后请及时联系客服核对商品价格,订单生效后再付款。
Dojindo/Lipi-Series: Lipid Droplet Detection Probes/Lipi-Deep/LD01
品牌 / 
Dojindo
货号 / 
LD01
美元价:
(友情提示:该价格仅为参考,欢迎联系客服询价!)
数    量:
免费咨询热线
4000-520-616
DescriptionQ & APositive controlManualS.D.S(LD01)S.D.S(LD02)S.D.S(LD03)S.D.S(LD04)

Product DescriptionLipid droplets (LDs) are composed of neutral lipids such as triacylglycerol & cholesteryl ester that are surrounded by phospholipid monolayers and are seen ubiquitously, not only in adipocytes1). LDs were originally thought to serve as a lipid storage unit, until a recent study showing that LDs play an important role in regulating lipid metabolism, autophagy2) and cellular senescence3). Therefore, LDs have gained great attention as an important tool to elucidate the mechanisms of their formation, growth, fusion, and retraction.Lipi Probes and Lipid Droplets

1) T. Fujimoto et al., “Lipid droplets: a classic organelle with new outfits.” Histochem Cell Biol., 2008, 130(2), 263.2) R. Singh et al., “Autophagy regulates lipid metabolism.” Nature, 2009, 458(7242), 1131.3) M. Yokoyama et al., “Inhibition of endothelial p53 improves metabolic abnormalities related to dietary obesity.” Cell Reports, 2014, 7(5), 1691.

For more information on Lipi-series and examples, please refer to the publication below:

4) Tatenaka, Y. et al., “Monitoring Lipid Droplet Dynamics in Living Cells by Using Fluorescent Probes” Biochemistry.“, 2019, 58(6), 499-503.Notes: Lipi-Series is Patent Pending.


Oleic acid treated HeLa cells with Lipi Product SeriesOleic acid treated HeLa cells with Lipi Product Series

<Staining Condition>A medium that contained oleic acid (200 μmol/l) was added and incubated overnight. Then, the supernatant was removed and the cells were washed with PBS. Each Lipi product series (1 μmol/l) was added and the cells were incubated for 15 minutes.

<Detection Condition>Lipi-Blue: Ex. 405 nm / Em. 450 – 500 nmLipi-Green: Ex. 488 nm / Em. 500 – 550 nmLipi-Red: Ex. 561 nm / Em. 565 – 650 nmLipi-Deep Red: Ex.640 nm / Em.650-700 nm


Reagent Comparison

Lipid Droplet Detection Probe Comparison

*Leaks in GFP filter


High Intracellular RetentivityLive HepG2 cells were stained with each of the Lipi products, Nile Red, and Reagent B.High Intracellular Retentivity of Lipid Droplet Detection Probes

Lipi-Blue and Lipi-Green had higher retention in cells after 24 hours post staining than Lipi-Red, Nile Red, and Reagent B.


High Correlation with Antibody Detection Method: Lipi-Blue (LD01)After fixing HepG2 with 4% PFA, cells are stained with 100 nmol/l Lipi-Blue. Then, Adipophilin (ADFP) expressed on lipid-droplet membrane was labeled with anti-ADFP antibodyHigh Correlation with Antibody Detection Method: Lipi-Blue

Scale Bar: 20 μm<Detection Condition>Lipi-Blue: Ex. 405 nm / Em. 450 – 500 nmAnti-ADFP antibody (Alexa Fluor® 647): Ex. 640 nm / Em. 650 – 700 nm


High Selectivity toward Lipid DropletLive HeLa cells were treated with Oleic acid and were stained with 100 nmol/l Lipi-Blue and 100 nmol/l Nile Red. Nile red had high background due to the limit in selectivity toward lipid droplets.High Selectivity toward Lipid Droplet<Detection Condition>Lipi-Blue: Ex. 405 nm / Em. 450 -500 nmLipi-Green: Ex. 488 nm / Em. 500 – 550 nmLipi-Red: Ex. 561 nm / Em. 565 – 650 nmLipi-Deep Red: Ex. 640 / Em. 650 – 700 nmNile Red: Ex. 561 nm / Em. 565 – 650 nm


Filter Leakage Rate (Lipi-Red vs Nile Red)

HepG2 cells were stained with Lipi-Red and Nile Red. Lipi-Red was imaged with Green excitation (G), but not Blue excitation (B). However, Nile Red was imaged in both filter. Lipi-Red is preferable for multi-staining.Filter Leakage Rate (Lipi-Red vs Nile Red)


Multiple Staining: Lipi-Deep Red (Purple) co-staining with GFP fluorescence (green) in HeLa cells

After adding Lipi-Deep Red (0.1 μmol/l) to the Arf4-GFP expressed Hela cells and the cells were incubated for 30 minutes, the cells were treated with 4% PFA (PBS) to fix, and washed with PBS three times. Fluorescent imaging was conducted by confocal microscopy.Multiple Staining: Lipi-Deep Red co-staining with GFP fluorescence in HeLa cells

<Detection Condition>GFP: Ex/Em=488/400-552 nmLDs:  Ex/Em=640/630-700 nm

Multiple Staining:  Lipi-Deep Red (RED) co-staining with GFP fluorescence (green) in HeLa cellsMultiple Staining:  Lipi-Deep Red co-staining with GFP fluorescence in HeLa cells

*Data was kindly provided by Dr. G. Belov, at University of Maryland, College Park

Lipi-Blue co-staining with GFP and RFP fluorescence in hMGEC (Multiple Staining)

In the following article, hMGEC treated with rosiglitazone (Rosi) was co-stained with tandem RFP-GFP-tagged LC3B and Lipi-Blue to observe autophagosome /autophagolysosome and lipid droplets. It was observed lipid droplets in hMGEC treated with Rosi for 4 days and 14 days was accumulated. For details about the experiment, please visit the reference below.

Kim, S. et al., “Eicosapentaenoic acid (EPA) activates PPARγ signaling leading to cell cycle exit, lipid accumulation, and autophagy in human meibomian gland epithelial cells (hMGEC)“, The Ocular Surface, 2020, 18(3), 427-437.


Adipocyte with Lipi Series

Lipid droplets in adipocyte were clearly detected by staining adipocytes, derived from 3T3-L1 preadipocytes, with Lipi-Series.

<Protocol>1. HeLa cells were seeded on a μ-slide 8-well plate and cultured at 37 ℃ overnight in a 5% CO2 incubator.2. A conventional method was used to induce adipocyte differentiation.3. The supernatant was removed and the cells were washed twice with DMEM (25 mmol/l glucose, 10% FBS, phenol red free).5. The Lipi-series working solution (in DMEM (25 mmol/l glucose, 10% FBS, phenol red free)) was added and the cells were incubated at 37 ℃ for 24 hours in a 5% CO2 incubator.6. The cells were observed using a fluorescence microscope.

*Dye Concentration: 2.5 µmol/L each.


Mouse liver adipose tissue (Frozen section) with Lipi Series

After adding Lipi series to the 4% PFA (PBS) fixed mouse liver adipose tissue and the tissue were incubated for overnight, and washed with PBS. Fluorescent imaging was observed by fluorescence microscopy.

Mouse liver adipose tissue (Frozen section) with Lipi Series


Quantitative analysisChanges in lipid droplets were examined after the addition of oleic acid or Triacsin C (acyl-CoA synthetase inhibitor) to the HepG2 cell culture medium. For analysis, the number and total area of lipid droplets per cell were computed from the images acquired with CQ1, a confocal quantitative image cytometer (Yokogawa Electric Corporation).

<Imaging of lipid droplets and cell nuclei>lipid droplets and cell nuclei

CQ1 captured images of lipid droplets with a 447/60 nm bandpass filter and cell nuclei with a 525/50 nm bandpass filter. Lipid droplets and cell nuclei were individually identified and computed the number and total area by using the CellPathfinder analysis software.Imaging conditions:Plate: 96 well plate, objective lens: x 20excitation: 405 nm (Lipi-Blue), blue/488 nm (SYBR Green), Green

<Analysis by the number and total area of lipid droplets>Analysis by the number and total area of lipid droplets

Based on the detected data of cell nuclei and lipid droplets, the number and total area of lipid droplets per cell computed were shown in the graphs below. Compared to the control value, the number and total area of lipid droplets per cell were increased 7-10 times by the addition of oleic acid, but the addition of Triacsin C inhibited lipid droplet formation and showed a 50-60% decrease.Experimental conditionsHepG2 cells (1 x 103 cells) were disseminated on a 96-well plate and incubated overnight. After the culture supernatant was removed, the cells treated with DMEM plus FBS only (control), DMEM plus FBS and 200 μmol/L oleic acid (Oleic acid), and DMEM plus FBS and 5 μmol/L Triacsin C (Triacsin C) were incubated overnight. Cells were then washed twice with PBS buffer, fixed with 4% PFA for 5 minutes at room temperature, and washed twice with PBS buffer again. Finally, cells were stained in the dark for 2 hours at room temperature with 0.5 μmol/L Lipi-Blue working solution, and quantitative analysis was performed through CQ1.


Related Product Information

FunctionProduct CodeProductSize
ImagingLD01Lipi-Blue10 nmol
LD02Lipi-Green10 nmol
LD03Lipi-Red100 nmol
LD04Lipi-Deep Red10 nmol
Quantification (Plate Reader, FCM)LD05Lipi Droplet Assay Kit-Blue1 set
LD06Lipi Droplet Assay Kit-Deep Red1 set

Recommended Filter: Wavelength for Excitation and EmissionRecommended Filter: Wavelength for Excitation and Emission

What should I do if the fluorescence is not detected?
1. Filter conditionsCheck the fluorescence spectrum of the dye on the product HP and confirm if the excitation / emission wavelength for your filter is suitable.2. Concentration of Lipi probe working solutionOptimize the concentration within the following range:Lipi-Blue, Lipi-Green: 0.1-0.5 μmol / LLipi-Red: 1-5 μmol / L* If fluorescence is not detected even under the above conditions, prepare a higher concentration of the working solution.Lipi-Blue & Lipi-Green: 1-2 μmol / LLipi-Red: 10 – 20 μmol / L

3. Incubation timeIncubate for 1-2 hours after adding Lipi probe working solution.

4. Assay conditions (fixed cells)Please refer to Q2.

5. OtherDepending on the cell type, lipid droplets can be smaller than usual and it may be too difficult to observe.If that is the case, please observe under a high magnification microscope or prepare for positive control with oleic acid treated cells.

Can I use Lipi-dye for fixed cells?
Yes, Lipi-dye can be used for fixed cells.

* Please use paraformaldehyde (PFA) for fixation. Alcohol fixation is not recommended because it may affect the structure of lipid droplets.

* Depending on the cell, it may not be stained or weakened in sensitivity due to fixed conditions before and after staining. In that case, please consider fixed conditions.○ Fix cells after staining  <HepG2 cells>1. Remove the medium and wash twice with PBS.2. Add Lipi-dye Working solution(in PBS) in the cells and incubated at 37 ℃ for 15 minutes.3. Remove the supernatant and wash twice with PBS.4. Add 2 ml of 4% paraformaldehyde (PFA) /PBS solution to the cells and incubate at room temperature for 5 minutes.5. Remove the supernatant and wash with PBS.6. Observe under a fluorescence microscope.

○ Fix cells before staining <HeLa cell>1. Remove the medium and wash twice with PBS.2. Add 2 ml of 4% paraformaldehyde (PFA) /PBS solution to the cells and incubate at room temperature for 5 minutes.3. Remove the supernatant and wash twice with PBS.4. Add Lipi-dye Working solution(in PBS) in the cells and incubated at 37 ℃ for 15 minutes.5. Remove the supernatant and wash with PBS.6. Observe under a fluorescence microscope.

Can I use Lipi-dye for frozen tissue?
Yes, Lipi-dye can be used for frozen tissue.

* Please use paraformaldehyde (PFA) for fixation. Alcohol fixation is not recommended because it may affect the structure of lipid droplets.

Mouse liver adipose tissue <Frozen section>1. Add 4% paraformaldehyde (PFA)/PBS solution to the mouse liver adipose tissue (Frozen section) and incubate at room temperature for 5 minutes.2. Remove the supernatant and wash with PBS, and add the Lipi-series Working solution (in PBS) in the cells and incubated at 4 ℃ for overnight.3. Remove the supernatant and wash with PBS, observe under a fluorescence microscope.

Are there any information about filter used in co-staining?
Yes, please refer to the table below and choose the filter.
Preparing a stock solution of oleic acidRequired Reagents:・BSA (bovine serum albumin)・Oleic acid・0.1 mol/L Tris-HCl (pH 8.0)Procedure:(1) Dissolve 0.14 g/mL BSA in 0.1 mol/L Tris-HCl (pH 8.0).(2) Add 4 mmol/L oleic acid to a disposable centrifuge tube.(3) Add BSA solution (prepared in step 1).(4) Cap the tube and mix on a rotary shaker (Be sure the solution is transparent, indicating that oleic acid has been conjugated to BSA).(4) Filter the solution prepared above (step 4) using 0.22μm filter membranes.(5) Store oleic acid stock solution at 4˚C.*Use the appropriate amount of oleic acid stock solution for culture medium to prepare working solution. *Oleic acid working solution cannot be stored. Please prepare the working solution immediately before usage.

Inducing lipid droplets(1) Incubate cells for 24 hours at 37˚C in a 5% CO2 atmosphere.(2) Add 200 µmol/L working solution (prepared from oleic acid stock solution) to culture medium and incubate for further 24 hours.

Related Categories Cell Staining Intracellular Fluorescent Probes

蚂蚁淘电商平台
ebiomall.com
公司介绍
公司简介
蚂蚁淘(www.ebiomall.cn)是中国大陆目前唯一的生物医疗科研用品B2B跨境交易平台, 该平台由多位经验丰富的生物人和IT人负责运营。蚂蚁淘B2B模式是指客户有采购意向后在蚂蚁 淘搜索全球供应信息,找到合适的产品后在蚂蚁淘下单,然后蚂蚁淘的海外买手进行跨境采购、 运输到中国口岸,最后由蚂蚁淘国内团队报关运输给客户...
蚂蚁淘承诺
正品保证: 全球直采 在线追溯 蚂蚁淘所有产品都是自运营的,我们已经跟国外多家厂方建立品牌推广合作关系, 获得对方的支持和授权; 同时客户可以通过订单详情查看到货物从厂方至客户的所有流程, 确保货物的来源; 正规报关,提供13%增值税发票。
及时交付: 限时必达 畅选无忧 蚂蚁淘的运营团队都是有着多年经验的成员,他们熟悉海外采购、仓储物流、报关等环节; 同时通过在线的流程监控,蚂蚁淘的进口速度比传统企业提高了50%以上, 部分产品甚至能做到7-10天到货,即蚂蚁淘的“时必达”服务。
轻松采购: 在线下单 简单省事 蚂蚁淘的价格是真实透明的,并且具有很大的价格优势,不需要繁杂的询价比价; 报价单与合同可以直接在线生成或打印;就像在京东购物一样, 您的鼠标点击几 次即完成在蚂蚁淘的采购,订单详情会告诉您所有进程。
售后申请: 耐心讲解 优质服务 蚂蚁淘提供的产品在使用过程中如因产品质量问题有售后需求时, 您可通过我的订单提交您的“申请售后”, 蚂蚁淘产品顾问会第一时间为您处理, 在售后服务过程中如遇到问题也可致电蚂蚁淘客服热线:4000-520-616。
常见问题
蚂蚁淘所售产品均为正品吗?
蚂蚁淘的创始人兼CEO是钟定松先生,具有十年的从业经验,在业界享有良好的口碑; Ebiomall是跨境直采平台,我们直接从厂家采购,自己的团队负责国际物流和清关,中间没有第三方,蚂蚁淘承诺所售产品仅为正品,假一罚十。
下单后可以修改订单吗?
未确认状态的订单可以修改,打开“订单详情”页面,点击右上角的“修改订单”即可,若已审核确定,则订单无法修改。
商品几天可以发货?
现货产品付款审核后即可发货,大部分期货产品在3周左右即可到货,提供时必达服务的产品订单审核十天内即可发货。
订单如何取消?
如订单处于未确定状态,进入“我的订单"页面,找到要取消的订单,点击“取消订单”按钮。
可以开发票吗?
本网站所售商品都是正规清关,均开具13%正规发票,发票金额含配送费金额,另有说明的除外。
如何联系商家?
蚂蚁淘任何页面都有在线咨询功能,点击“联系客服”、“咨询”或“在线咨询”按钮,均可咨询蚂蚁淘在线客服人员, 或拨打4000-520-616,除此之外客户可在 联系我们页面找到更多的联系方式。
收到的商品少了/发错了怎么办?
同个订单购买多个商品可能会分为一个以上包裹发出,可能不会同时送达,建议查看订单详情是否是部分发货状态;如未收到,可联系在线客服或者致电4000-520-616。
退换货/维修需要多长时间?
一般情况下,退货处理周期为客户收到产品一个月内(以快递公司显示签收时间为准),包装规格、数量、品种不符,外观毁损、短缺或缺陷,请在收到货24小时内申请退换货;特殊商品以合同条款为准。
商品咨询
品牌分类