Oligo Synthesis : CEPs
Prices quoted are for single packs only. For multiples of the same product please request a quote. Some of Glen"sproductsarehazardousandmay be subject to additional shipping charges. Full product information is available onGlen Research"s website.
Cyanine 3 Phosphoramidite
Cyanine 3 Phosphoramidite
Glen Research
| Catalogue No. | Description | Pack Size | Price | Qty |
|
|---|---|---|---|---|---|
| 10-5913-02 | Cyanine 3 Phosphoramidite | 0.25g | £740.00£703.00Offer until : 31-Mar-2021Offer Code : GLEN5View Offer | Quantity | Add to Order |
| 10-5913-90 | Cyanine 3 Phosphoramidite | 100µmoles | £300.00£285.00Offer until : 31-Mar-2021Offer Code : GLEN5View Offer | Quantity | Add to Order |
| 10-5913-95 | Cyanine 3 Phosphoramidite | 50µmoles | £164.00£155.80Offer until : 31-Mar-2021Offer Code : GLEN5View Offer | Quantity | Add to Order |
Related products
Cyanine 3 Phosphoramidite
Cyanine 3 Phosphoramidite
Glen Research
| Cyanine 3 Phosphoramidite |
Catalog Number: 10-5913-xx
Description: Cyanine 3 Phosphoramidite
| 1-[3-(4-monomethoxytrityloxy)propyl]-1"-[3-[(2-cyanoethyl)-(N,N-diisopropyl)phosphoramidityl]propyl]-3,3,3",3"-tetramethylindocarbocyanine chloride | ||
| Formula: C58H70N4O4PCl | M.W.: 953.64 | F.W.: 507.59 |
Diluent: Anhydrous Acetonitrile |
| Coupling: 3 minute coupling time recommended. Use 0.02M Iodine to avoid degradation of the cyanine dye. |
| Deprotection:If dmf-dG is used during synthesis, deprotect in Ammonium Hydroxide for 2 hours at 65 °C; with ibu-dG, deprotect for 24-36 hours at room temperature.Note Cyanine 3 is compatible with UltraFast deprotection (AMA 10 minutes at 65 °C) if Ac-dC was used. Technical Bulletin |
| Storage: Freezer storage, -10 to -30°C, dry |
| Stability in Solution: 2-3 days |
CYANINE LABELLING
Two cyanine derivatives, Cyanine 3 and Cyanine 5, which differ in structure simply bythe number of carbons in the conjugated poly-ene linkage, are joined by theclosely related analogues, Cyanine 3.5 and Cyanine 5.5, and are available asphosphoramidites. Cyanine dyes are normally added once at the 5’-terminus and the MMTgroup should be removed on the synthesizer. The absorbance of the MMT cation(yellow) is noticeably different from the DMT cation (orange), and so,absorbance-based trityl monitors will detect it incorrectly as a low coupling.On the other hand, conductivity detectors will interpret the release morecorrectly. Cyanine dyes have also been used successfully adjacent to the 3’-terminusas long as 0.02M iodine oxidizer is used during the remainder of thesynthesis.
Deprotection of oligos containing Cyanine dyes may be carried out with ammoniumhydroxide at room temperature, regardless of the base protecting groups on themonomers used. If there is a need to use ammonium hydroxide at elevatedtemperature, Cyanine 3 and Cyanine 3.5 are more stable than Cyanine 5 and Cyanine 5.5. However, it isalways prudent to use monomers with base labile protecting groups to limit theexposure time to 2 hours or less at 55°C.
If you cannot find the answer to your problem below then please contact us or telephone 01954 210 200
Cyanine 3 Phosphoramidite
Cyanine 3 Phosphoramidite
Glen Research
Material Safety Data Sheet
| Glen Report 8.2: 5" LABELLING - FLUORESCEIN AND CYANINE DYES, BIOTIN |
| Glen Report 21.2: Deprotection - Volume 3 - Dye-Containing Oligonucleotides |
If you cannot find the answer to your problem below then please contact us or telephone 01954 210 200
Cyanine 3 Phosphoramidite
Cyanine 3 Phosphoramidite
Glen Research
Frequently Asked Technical Question
QUESTION: What are the relative extinction coefficients of 5"-Fluorescein, Hex and Tet etc.. at 260 nm and their Lambda max?
RESPONSE:Please see http://www.glenresearch.com/Technical/Extinctions.html
REFERENCE(S):Oligonucleotide Properties Calculator;http://www.basic.northwestern.edu/biotools/oligocalc.html
QUESTION: What are the relative extinction coefficients of various dyes?
RESPONSE:Please see http://www.glenres.com/Technical/Extinctions.html#dyes
QUESTION: Does AMA or methylamine cause any degradation to fluorescein or fluorescein-type dyes such as FAM or FITC?
RESPONSE:Response:While AMA (Ammonium hydroxide/40% Methylamine 1:1 v/v)is considered compatible with fluorescein, the use of methylamine when deprotecting a Fluorescein-labeled oligo does lead to a small amount of degradation, which is characterized by a the appearance of a late-eluting peak by RP HPLC that shows no visible fluorescein absorbance. With standard deprotection conditions (AMA 10 minutes at 65 C) the amount of degradation is approximately 5%.The impurity is not detected with AMA at RT for 2 hours.
If you cannot find the answer to your problem below then please contact us or telephone 01954 210 200
Cyanine 3 Phosphoramidite
Cyanine 3 Phosphoramidite
Glen Research
DILUTION/COUPLING DATA
The table below shows pack size data and, for solutions, dilutions and approximate couplings based on normal priming procedures. Please link for more detailed usage information with the various synthesizers.
| ABI 392/394 | |||||||||
| Cat.No. | PackSize | Grams/Pack | 0.1M Dil.(mL) | LV40 | LV200 | 40nm | 0.2µm | 1µm | 10µm |
| Approximate Number of Additions | |||||||||
| 10-5913-02 | 0.25grams | .25grams | 2.62 | 74 | 44.4 | 27.75 | 20.18 | 14.8 | 3.7 |
| 10-5913-90 | 100µmoles | .095grams | 1 | 20 | 12 | 7.5 | 5.45 | 4 | 1 |
| 10-5913-95 | 50µmoles | .048grams | .5 | 3.33 | 2 | 1.25 | .91 | .67 | .17 |
| Expedite | |||||||||
| Cat.No. | PackSize | Grams/Pack | Dilution(mL) | Molarity | 50nm | 0.2µm | 1µm | 15µm | |
| Approximate Number of Additions | |||||||||
| 10-5913-02 | 0.25grams | .25grams | 3.91 | .07 | 71.8 | 44.88 | 32.64 | 4.49 | |
| 10-5913-90 | 100µmoles | .095grams | 1.5 | .07 | 23.6 | 14.75 | 10.73 | 1.48 | |
| 10-5913-95 | 50µmoles | .048grams | .75 | .07 | 8.6 | 5.38 | 3.91 | .54 | |
| Beckman | |||||||||
| Cat.No. | PackSize | Grams/Pack | Dilution(mL) | Molarity | 30nm | 200nm | 1000nm | ||
| Approximate Number of Additions | |||||||||
| 10-5913-02 | 0.25grams | .25grams | 3.91 | .07 | 73.4 | 45.88 | 33.36 | ||
| 10-5913-90 | 100µmoles | .095grams | 1.5 | .07 | 25.2 | 15.75 | 11.45 | ||
| 10-5913-95 | 50µmoles | .048grams | .75 | .07 | 10.2 | 6.38 | 4.64 | ||
If you cannot find the answer to your problem below then please contact us or telephone 01954 210 200
AthensResearch&Technology公司位于美国乔治亚州雅典市，从1986年以来一直致力于纯化高纯度，高活性的人类蛋白质和开发这些蛋白的多克隆抗血清。我们的常规产品包括丝氨酸蛋白酶、蛋白酶抑制剂、中性粒细胞酶、载脂蛋白、脂蛋白，血小板蛋白、转铁蛋白、免疫球蛋白等。二十年多年来，世界各地的研究人员都在使用我们公司的产品。在炎症、冠状动脉疾病、自身免疫性疾病、癌症、老年痴呆症等等研究的主要科学出版物中都能看到引用我们公司的产品。我们提供优质，可靠的产品和出色的客户服务。我们期待着您的业务。如果需要定制研究服务，AthensResearch&Technology公司能够根据您的项目要求提供无与伦比的试剂。
公司主要产品：一、凝血因子相关系列产品：包括多款从人血浆、血小板中分离纯化的凝血因子相关蛋白。二、酶及抑制剂系列产品：包括多款从人血浆、红细胞分离纯化的a-抗糜蛋白酶、a1/2抗胰蛋白酶、抗凝血酶、C1酯酶抑制因子、Calpain-1等酶及其抑制剂产品。三、免疫球蛋白系列产品：包括多款从人血浆、骨髓瘤、初乳以及狗和小鼠血浆中分离纯化的免疫球蛋白产品。四、脂蛋白及载脂蛋白系列产品：包括包括多款从人血浆中分离纯化的载脂蛋白及脂蛋白（高密度、中等密度、低密度、极低密度脂蛋白）产品。五、低内毒素蛋白系列产品：包括多款适宜于细胞培养的低内毒素脂蛋白、免疫球蛋白及转铁蛋白产品。六、乳蛋白系列产品：包括从人乳中分离纯化的乳白蛋白、乳铁传递蛋白及分泌型免疫球蛋白A。七、中性粒细胞源蛋白系列产品：包括多款纯化分离自人中性粒细胞的Azurocidin 、CathepsinG及Lactoferrin等蛋白产品。八、血小板相关系列产品：包括纯化分离自人血小板的血小板因子4及凝血酶致敏蛋白。九、转铁蛋白及脱铁转铁蛋白（APOTRANSFERRINS）系列产品：包括多款纯化分离自人、大小鼠、狗及食蟹猴血浆中的转铁蛋白/脱铁转铁蛋白，可应用于细胞或组织培养。十、抗体系列产品：包括多款兔、大鼠、羊源的多克隆抗体产品。
ebiomall.com
