请使用支持JavaScript的浏览器! +,Instructions 2031S MUS Rev. 1.3 (9/00)蚂蚁淘商城
商品信息
联系客服
Nanoprobes/Monoamino Undecagold Labeling Reagent    [Monoamino Undecagold Labeling Reagent product page]/2031S (package labeled as 2031A)
郑重提醒:
无质量问题不接受退换货,下单前请仔细核对信息。
下单后请及时联系客服核对商品价格,订单生效后再付款。
Nanoprobes/Monoamino Undecagold Labeling Reagent [Monoamino Undecagold Labeling Reagent product page]/2031S (package labeled as 2031A)
美元价:
(友情提示:该价格仅为参考,欢迎联系客服询价!)
数    量:
免费咨询热线
4000-520-616
Instructions 2031S MUS Rev. 1.3 (9/00)
Nanoprobes HomeCelebrating 25 years of innovation!
Tel: 631-205-9490Fax: 631-205-9493US toll free: 877-447-6266
ProductsInstructionsTech HelpApplicationsReferencesJobsNanoprobes NewsAbout UsContact Us
View Cart 647 FluoroNanogold™ for Super-Res!Join our Mailing List

[Nanoprobes Tech Support (14k)]Updated: October 9, 2000

UNDECAGOLD PRODUCT INFORMATION

Monoamino Undecagold Labeling Reagent[Monoamino Undecagold Labeling Reagent product page]Buy onlineProduct Name: MONOAMINO UNDECAGOLD - 10 nmolCatalog Numbers:    2031S (package labeled as 2031A)Appearance:Orange-brown solidRevision:1.3 (September 2000)

Technical Assistance Online[2031S-PDF]  Instructions (PDF)[2031S-PDF]  Material Safety Data Sheet (PDF)

Congratulations on your acquisition of a revolutionary new gold immunoreagent:the MONOAMINO UNDECAGOLD labeling kit. With this reagent you can label glycoproteins, or any other biomolecule containing a suitable reactive group, with UNDECAGOLD.Because UNDECAGOLD is a discrete molecular compound and not a colloidal gold preparation, conjugates prepared with this reagent have several advantages over colloidal gold conjugates (see below).Contents

  • Product Information
  • Product Specifications
  • Thiol Caution
  • Labeling Glycoproteins with UNDECAGOLD
  • Labeling Other Molecules with UNDECAGOLD
  • General Considerations for Staining with UNDECAGOLD Reagents
  • Electron Microscopy Labeling with UNDECAGOLD1.Cells in Suspension 2.Thin Sections
  • Special Considerations for Viewing UNDECAGOLD in the Electron Microscope
  • Silver enhancement of UNDECAGOLD for Electron Microscopy
  • Light Microscopy with UNDECAGOLD
  • Immunoblotting with UNDECAGOLD
  • References
Guide to Gold Cluster Labeling Our detailed description of gold cluster labeling, how to isolate conjugates and calculate the extent of labeling, is now available. This new section of our site includes spectra, micrographs, and tips and suggestions for better labeling (opens in a new window). Warning:For research use only. Not recommended or intended for diagnosis of disease in humans or animals.Do not use internally or externally in humans or animals.Non radioactive and non carcinogenic.Product InformationUNDECAGOLD is the smallest gold label available, prepared using a discrete gold compound rather than a colloid.1 This kit contains theUNDECAGOLD particle with a single primary amine functionality incorporated into a ligand on the surface of the gold particle; this has a specific reactivity towards aldehyde groups, with which it forms Schiff bases. These may then be reduced to amines. This process may be used to label carbohydrate moities in glycoproteins, as shown in figure 1. It may also be used with cross-linking reagents to label other groups, such as primary amines. The reagent as supplied has been lyophilized from methanol; dissolution in the reaction solvent or buffer will produce a solution of activated UNDECAGOLD. UNDECAGOLD conjugates may be used in high-resolution electron microscopy and some immunoblotting and light microscopy applications. They are stable to wide ranges of pH and ionic strength, and are not radioactive or carcinogenic. This product should be stored at -20°C.

Contents Product SpecificationsMONOAMINO UNDECAGOLD is supplied lyophilized from methanol solution. The orange-brown solid may be dissolved in aqueous buffer systems such as phosphate buffered saline or ammonium acetate, and is also soluble in alcohols, acetone, DMSO, dichloromethane and other organic csolvents. UNDECAGOLD has the following extinction coefficients at specific wavelengths:

WAVELENGTH (nm)EXTINCTION COEFFICIENT*2801.7 X 1054200.47 X 105* Measured for 5 X 10-6 M solution in methanol.

10 nmol of the product is supplied. The amounts required will vary according to the system under study, but in general a 5-fold to 10-fold excess of UNDECAGOLD is recommended; the reagent supplied will therefore label up to 0.1 - 0.2 mg of a molecule with one labeling site and a molecular weight of 100 000.

ContentsThiol CautionUNDECAGOLD particles degrade upon exposure to concentrated thiols such as beta-mercaptoethanol or dithiothreitol. If such reagents must be used, concentrations should be kept below 1 mM and exposure restricted to 10 minutes or less.

Contents Labeling Glycoproteins with UndecagoldMONOAMINE UNDECAGOLD is reactive towards aldehydes. It may be used to label carbohydrate moieties of glycoproteins,2 as shown in figure 1:

Chemdraw Pic (4k)Figure 1: Labeling of a carbohydrate moiety with MONOAMINO UNDECAGOLD (from ref. 2)

Sufficient UNDECAGOLD reagent is supplied to label up to 2 nmol of aldehyde groups (for example, 0.2 mg of a compound with one aldehyde and a molecular weight of 100,000). UNDECAGOLD is stable for several weeks in most aqueous buffer solutions. For purification and isolation steps alternative buffers may be substituted for those given; however, the labeling reaction itself should be performed using the buffers and conditions specified.

To assist structural preservation, it is usually helpful to fix proteins before labeling. If glutaraldehyde or other aldehyde-containing fixing reagents are used, these should be quenched before labeling. This may be achieved by reacting with sodium borohydride (15-20 mole equivalents per glutaraldehyde) at 4°C for 1.5 h.2 Alternatively, incubate the specimens for 5 minutes in 50 mM glycine solution in PBS (pH 7.4), or treat with ammonium chloride (50 mM).

  1. If the labeling site is in the form of a carbohydrate group, it must be oxidized to produce aldehydes. Incubate specimen for 1.5 h at 4°C with 1000-2000 mole equivalents of sodium periodate per carbohydrate in 20 mM PIPES.Na.
  2. Isolate oxidizedglycoprotein by by dialysis or gel filtration chromatography to remove sodium periodate. Use a gel such as Amicon GH-25, which has an exclusion cut-off at molecular weight 3,000. As the eluent, use 20mM PIPES.Na, with 150 mM sodium chloride. The oxidizd glycoprotein will be eluted in the void volume as the first sharp peak in the trace. Combine the fractions containing protein; the total amount may be calculated from the optical density.
  3. Dissolve the UNDECAGOLD reagent in 0.2 ml buffer. Sufficient reagent is supplied to label up to 2 nmol of aldehydes; if you are using a smaller amount, use a proportionately smaller amount of the UNDECAGOLD reagent.
  4. Add the MONOAMINO UNDECAGOLD solution to the oxidized glycoprotein (6 to 10 mole equivalents per carbohydrate chain). Incubate for 1 hour at 4°C.
  5. Reduce the Schiff base linkages with excess NaBH4; use 500-1000 mole equivalents per carbohydrate chain, and allow to react for 30 minutes at 4°C; then quench with excess acetone.
  6. Separate the unbound gold particles from the labeled glycoprotein using gel exclusion chromatography. The UNDECAGOLD conjugate may be effectively isolated using a medium such as Pharmacia Superose 6 or 12 (which fractionate a wide range of molecular weights) or Amicon GCL-90 (which excludes molecules of mass 30,000 or greater). Concentrate the reaction mixture to a suitably small volume using membrane centrifugation (e.g. Amicon Centricon-30 system). Elute with 0.25 M ammonium acetate (nominal pH 7.7); monitor at 280 nm. The first, faintly colored peak is the conjugate, while the second, darker band is unbound UNDECAGOLD particles. For even higher purity, repeat this process one time.

UNDECAGOLD conjugates should be stored in 0.02 M phosphate bufferbuffer with 150 mM sodium chloride, or other buffer solutions usually used with the protein under study. If they are to be stored longer than three days, add 0,1 % bovine serum albumin and 0.05 % sodium azide to prevent bacterial contamination and to prevent the protein from adhering to the surfaces of the storage vessel.

If the molecule to be labeled already contains aldehydes, the procedure above should be folowed without the periodate oxidation and removal.

ContentsLabeling other Molecules with UndecagoldMONOAMINO UNDECAGOLD may be used to label other groups if it is used with a suitable cross-linker. As an example, the use of bis (sulfosuccinimidyl) suberate (BS3) as a cross linker to label a protein with a primary amine is described below.3 The reaction works best in concentrated protein solutions (i.e. smaller reaction volumes).

  1. Dissolve the protein in 0.02 M sodium phosphate with 150 mM sodium chloride at pH 7.4 (0.5 ml).
  2. Dissolve the UNDECAGOLD reagent in 1 ml buffer. Sufficient reagent is supplied to label up to 2 nmol of sites; if you are using a smaller amount, use a proportionately smaller amount of the UNDECAGOLD reagent.
  3. Add the MONOAMINO UNDECAGOLD solution to the protein (6 to 10 mole equivalents per mole equivalent amine labeling site). Mix thoroughly.
  4. Dissolve BS3 in DMSO (0.02 ml) and dilute to 0.4 ml with 0.02 M phosphate buffer with 150 mM NACl, pH 7.4. Use sufficient BS3 to give a concentration of 1-2 mM in the reaction mixture (0.2 mg). Once dissolved, the cross-linking reagent should be used immediately. Hydrolysis will occur within a few hours.
  5. Add the BS3 solution to the protein/UNDECAGOLD solution, and incubate for 10 mins at room temperature.
  6. Quench with excess 10 mM tris buffer at pH 7.0.
  7. Separate the unbound gold particles from the labeled glycoprotein using gel exclusion chromatography. The UNDECAGOLD conjugate may be effectively isolated using a medium such as Pharmacia Superose 6 or 12 (which fractionate a wide range of molecular weights) or Amicon GCL-90 (which excludes molecules of mass 30,000 or greater).Concentrate the reaction mixture to a suitably small volume using membrane centrifugation (e.g. Amicon Centricon-30 system). Elute with 0.25 M ammonium acetate (nominal pH 7.7); monitor at 280 nm. The first, faintly colored peak is the conjugate, while the second, darker band is unbound UNDECAGOLD particles. For even higher purity, repeat this process one time.

Other cross-linking reagents may be used to link the MONOAMINO UNDECAGOLD to other functionalities. The buffer and reagent concentrations used for this reaction, and the incubation time, may be varied according to the nature of the molecule under study.

ContentsGeneral Considerations for Staining with Undecagold ReagentsBasically, normal methodologies may be used successfully with UNDECAGOLD immunoreagents.The concentration of antibody and gold is similar to other commercial preparations of colloidal gold antibodies.Therefore similar dilutions and blocking agents are appropriate.

The major difference will be in the results:

  • UNDECAGOLD is an extremely uniform 0.8 nm diameter gold particle (ca.10%).
  • UNDECAGOLD conjugates contain absolutely no aggregates. This is in sharp contrast to other colloidal gold conjugates that usually are prepared by centrifugation to remove the largest aggregates and frequently contain smaller aggregates.
  • Close to 1 UNDECAGOLD particle to 1 Fab" (or IgG) make this product distinct from the 0.2 - 10 variable stoichiometry of other colloidal gold antibody preparations.
  • UNDECAGOLD particles do not have affinity to proteins as do other other colloidal golds. This reduces background and false labeling.
Contents Using Stains with Undecagold ReagentsBecause the 0.8 nm UNDECAGOLD particles are so small, over staining with Osmium tetroxide, uranyl acetate or lead citrate will obscure direct visualization of individual UNDECAGOLD particles, and therefore these stains should not ber used. Only light staining with a low atomic number stain, such as NANOVAN, a Vanadium based negative stain, should be used.

Contents Electron Microscopy Immunolabeling with Undecagold If aldehyde-containing reagents have been used for fixation, these must be quenched before labeling. This may be achieved by incubating the specimens for 5 minutes in 50 mM glycine solution in PBS (pH 7.4). Ammonium chloride (50 mM) or sodium borohydride (0.5 - 1 mg/ml) in PBS may be used instead of glycine.

Cells in Suspension

  1. Optional fixing of cells: e.g., with glutaraldehyde (0.05 - 1% for 15 minutes) in PBS.Do not use Tris buffer since this contains an amine. After fixation, centrifuge cells (e.g. 1 ml at 10,000,000 cells/ml) at 300 X g, 5 minutes; discard supernatant; resuspend in 1 ml buffer.Repeat this washing (centrifugation and resuspension) 2 times.
  2. Incubate cells with 0.02 M glycine in PBS (5 mins). Centrifuge, then resuspend cells in PBS-BSA buffer (specified below) for 5 minutes.
  3. Wash cells using PBS-BSA as described in step 1 (2 X 5 mins). Resuspend in 1 ml Buffer 1.
  4. Place 50 - 200 microliters of cells into Eppendorf tube. Dilute UNDECAGOLD conjugate ~ 50 times in PBS-BSA buffer and add 30 microliters to cells;incubate for 30 minutes with occasional shaking (do not create bubbles which will denature proteins).
  5. Wash cells in PBS-BSA as described in step 1 (2 X 5 mins).
  6. Fix cells and antibodies using a final concentration of 1% glutaraldehyde in PBS for 15 minutes.Then remove fixative by washing with buffer 1 (3 X 5 mins).

PBS-BSA Buffer:

20 mM phosphate150 mM NaClpH 7.400.5% BSA0.1% gelatin (high purity)

Optional, may reduce background:0.5 M NaCl0.05% Tween 20PBS Buffer:

20 mM phosphate150 mM NaClpH 7.40

Negative staining may be used for electron microscopy of small structures or single molecules which are not embedded. Negative stain must be applied after the silver enhancement. NANOVAN negative stain is specially formulated for use with UNDECAGOLD reagents; it is based on vanadium, which gives a lighter stain than uranium, lead or tungsten-based negative stains and allows easier visualization of UNDECAGOLD particles with little or no silver enhancement.

Thin Sections

Labeling with UNDECAGOLD may be performed before or after embedding.4 Labeling before embedding and sectioning (the pre-embedding method) is used for the study of surface antigens, particularly small organisms such as viruses budding from host cells. It gives good preservation of cellular structure, and subsequent staining usually produces high contrast for study of the cellular details. Labeling after embedding and sectioning (the post-embedding method) allows the antibody access to the interior of the cells, and is used to label both exterior and interior features. The procedures for both methods are described below.

Thin sections mounted on grids are floated on drops of solutions on parafilm or in well plates.Hydrophobic resins usually require pre-etching.

PROCEDURE FOR PRE-EMBEDDING METHOD:4

  1. Float on a drop of water for 5 - 10 minutes.
  2. Incubate cells with 1 % bovine serum albumin in PBS buffer at pH 7.4 for 5 minutes; this blocks any non-specific protein binding sites and minimizes non-specific antibody binding.
  3. Rinse with PBS-BSA (1 min).
  4. Incubate with UNDECAGOLD conjugate diluted 1/40 - 1/200 in PBS-BSA with 1 % normal serum from the same species as the UNDECAGOLD labeled antibody, for 10 minutes to 1 hour at room temperature.
  5. Rinse with PBS-BSA (3 X 1 min), then PBS (3 X 1 min).
  6. Postfix with 1 % glutaraldehyde in PBS (10 mins).
  7. Rinse in deionized water (2 X 5 min).
  8. Dehydrate and embed according to usual procedure. Use of a low-temperature resin (eg. Lowicryl) is recommended.
  9. Stain (uranyl acetate, lead citrate or other positive staining reagent) as usual before examination.

Silver enhancement may be performed before or after embedding (see below); it should be completed before postfixing or staining with osmium tetroxide, uranyl acetate or similar reagents is carried out.

PROCEDURE FOR POST-EMBEDDING METHOD:4

  1. Prepare sections on plastic or carbon-coated nickel grid. Float on a drop of water for 5 - 10 minutes.
  2. Incubate with 1 % solution of bovine serum albumin in PBS buffer at pH 7.4 for 5 minutes to block non-specific protein binding sites.
  3. Rinse with PBS-BSA (1 min).
  4. Incubate with UNDECAGOLD conjugate diluted 1/40 - 1/200 in PBS-BSA with 1 % normal serum from the same species as the UNDECAGOLD labeled antibody, for 10 minutes to 1 hour at room temperature.
  5. Rinse with PBS (3 X 1 min).
  6. Postfix with 1 % glutaraldehyde in PBS at room temperature (3 mins).
  7. Rinse in deionized water for (2 X 5 min).
  8. If desired, contrast sections with uranyl acetate and/or lead citrate before examination.

Silver enhancement may also be used to render the UNDECAGOLD particles more easily visible (see below), especially if stains such as uranyl acetate or lead citrate are applied. If used, it should be completed before these stains are applied.

PBS-BSA Buffer:

20 mM phosphate150 mM NaClpH 7.400.5% BSA0.1% gelatin (high purity)

Optional, may reduce background:0.5 M NaCl0.05% Tween 20PBS Buffer:

20 mM phosphate150 mM NaClpH 7.40

ContentsSpecial Considerations for Viewing Undecagold in the Electron MicroscopeUNDECAGOLD is the smallest gold probe commercially available, being just 0.8 nm in diameter. A high resolution instrument such as a Scanning Transmission Eelectron Microscope (STEM) is required for visualization; in a conventional TEM the UNDECAGOLD particles are not visible. With careful work, however, UNDECAGOLD may be seen directly in the STEM. However, achieving the high resolution necessary for this work may require new demands on your equipment and technique.Several suggestions follow:

  1. Before you start a project withUNDECAGOLD it is helpful to see it so you know what to look for.Dilute the UNDECAGOLD stock 1:5 in methanol and apply 4 microliters to a grid for 1 minute.Allow to dry.
  2. View UNDECAGOLD using a full width scan of 128 nm or less; this will give sufficient magnification for visualization.
  3. UNDECAGOLD is sensitive to beam damage (contrary to NANOGOLD® which is very beam-resistant); the behavior of UNDERCAGOLD in the STEM has been described in the literature5 Image at approximately 200 eÅ-2.
  4. In order to operate at high magnification, thin carbon film over fenestrated holey film is recommended.Many plastic supports are unstable under these conditions of high magnification/high beam current and carbon is therefore preferred. Contrast is best using thinner films.
ContentsSilver Enhancement of Undecagold for EMUNDECAGOLD will nucleate silver deposition resulting in a dense particle 2-20 nm in size or larger depending on development time. However, silver enhancement will be slower and much less uniform than with larger gold particles such as NANOGOLD®. If specimens are to be embedded, silver enhancement is usually performed after embedding, although it may be done first. It must be completed before any staining reagents such as osmium tetroxide, lead citrate or uranyl acetate are applied, since these will nucleate silver deposition in the same manner as gold and produce non-specific staining.

Our LI SILVER silver enhancement system is convenient and not light sensitive, and suitable for all applications. Improved results in the EM may be obtained using HQ SILVER, which is formulated to give slower, more controllable particle growth and uniform particle size distribution.

Specimens must be thoroughly rinsed with deionized water before silver enhancement reagents are applied. This is because the buffers used for antibody incubations and washes contain chloride ions and other anions which form insoluble precipitates with silver. These are often light-sensitive and will give non-specific staining. To prepare the developer, mix equal amounts of the enhancer and initiator immediately before use. UNDECAGOLD will nucleate silver deposition resulting in a dense particle 2-20 nm in size or larger depending on development time. Use nickel grids (not copper).

The procedure for immunolabeling should be followed up to step 6 as described above. Silver enhancement is then performed as follows:

  1. Rinse with deionized water (2 X 5 mins).
  2. Float grid with specimen on freshly mixed developer for 1-4 minutes, or as directed in the instructions for the silver reagent.More or less time can be used to control particle size. A series of different development times should be tried, to find the optimum time for your experiment.
  3. Rinse with deionized water (3 X 1 min).
  4. Mount as usual.
ContentsLight Microscopy with UndecagoldFor most light microscopy applications we recommend NANOGOLD® conjugates, since these usually give more intense, specific signals. UNDECAGOLD must be developed with a silver enhancement reagent before it is visible in the light microscope. Our LI SILVER is convenient for this as it is not light sensitive and the degree of enhancement may be monitored readily.

Samples must be rinsed with deionized water before silver enhancement. This is because the reagent contains silver ions in solution, which react to form a precipitate with chloride, phosphate and other anions which are components of buffer solutions. The procedure for immunolabeling with UNDECAGOLD and silver enhancement is given below.

  1. Spin cells onto slides using Cytospin, or use parafin section.
  2. Incubate with 1 % solution of bovine serum albumin in PBS (PBS-BSA) for 10 minutes to block non-specific protein binding sites.
  3. Incubate with primary antibody, diluted at usual working concentration in PBS-BSA (1 hour or usual time)
  4. Rinse with PBS-BSA (3 X 2 min).
  5. Incubate with UNDECAGOLD reagent diluted 1/40 - 1/200 in PBS-BSA with 1 % normal serum from the same species as the UNDECAGOLD reagent, for 1 hour at room temperature.
  6. Rinse with PBS (3 X 5 min).
  7. Postfix with 1 % glutaraldehyde in PBS at room temperature (3 mins).
  8. Rinse with deionized water (3 X 1 min).
  9. Develop specimen with freshly mixed developer for 5-20 minutes, or as directed in the instructions for the silver reagent. More or less time can be used to control intensity of signal. A series of different development times may be used, to find the optimum enhancement for your experiment; generally a shorter antibody incubation time will require a longer silver development time.
  10. Rinse with deionized water (2 X 5 mins).
  11. The specimen may now be stained if desired before examination, with usual reagents.

PBS-BSA Buffer:

20 mM phosphate150 mM NaClpH 7.400.5% BSA0.1% gelatin (high purity)

Optional, may reduce background:0.5 M NaCl0.05% Tween 20PBS Buffer:

20 mM phosphate150 mM NaClpH 7.40

ContentsImmunoblottingFor immunoblotting we recommend our NANOGOLD® conjugates, since these give more sensitive detection than UNDECAGOLD conjugates with a higher signal-to-noise ratio upon silver enhancement. The basic procedure for gold immunoblotting has been described by Moeremans et al,6 which may be followed. For best results, the membrane should be hydrated before use by simmering in gently boiling water for 15 minutes. Best results are obtained when the antigen is applied using a 1 microliter capillary tube. A suitable procedure for immunoblots is as follows:

  1. Spot 1 microliter dilutions of the antigen in buffer 4 onto hydrated nitrocellulose membrane. Use an antigen concentration range from 100 ng to 0.01 pg / microliter.
  2. Block with buffer 1 for 30 minutes at 37°C.
  3. Incubate with primary antibody according to usual procedure (usually 1 or 2 hours).
  4. Rinse with buffer 1 (3 X 10 mins).
  5. Incubate with a 1/100 to 1/200 dilution of the UNDECAGOLD reagent in buffer 2 for 2 hours at room temperature.
  6. Rinse with buffer 3 (3 X 5 mins), then buffer 4 (2 X 5 mins).
  7. OPTIONAL (may improve sensitivity): Postfix with glutaraldehyde, 1 % in buffer 4 (10 mins).
  8. Rinse with deionized water (2 X 5 mins).
  9. OPTIONAL (may reduce background): Rinse with 0.05 M EDTA at pH 4.5 (5 mins).
  10. Develop with freshly mixed silver developer for 20-25 minutes or as directed in the instructions for the silver reagent, twice. Rinse thoroughly with deionized water between developments to remove all the reagent.
  11. Rinse several times with deionized water.

CAUTION: UNDECAGOLD particles degrade upon exposure to concentrated thiols such as beta-mercaptoethanol or dithiothreitol. If such reagents must be used, concentrations should be kept below 1 mM and exposure restricted to 10 minutes or less.

Buffer 1:

20 mM phosphate150 mM NaClpH 7.404% BSA (bovine serum albumin)2 mM sodium azide (NaN3)Buffer 2:

20 mM phosphate150 mM NaClpH 7.40.8% BSA1% normal serum; use serum of the host animal for the NANOGOLD® antibody0.1% gelatin (Type B, approx. 60 bloom)

Optional, may reduce background:0.5 M NaCl0.05% Tween 20Buffer 3:

20 mM phosphate150 mM NaClpH 7.400.8% BSA (bovine serum albumin)2 mM sodium azideBuffer 4 (PBS):

20 mM phosphate150 mM NaClpH 7.4

Other procedures may be used; for example the UNDECAGOLD reagent may be used as a tertiary labeled antibody, or a custom UNDECAGOLD conjugate may be the primary antibody. If additional antibody incubation steps are used, rinse with buffer 3 (3 X 10 mins) after incubation.

Contents References

  1. Hainfeld, J. F.; in "Colloidal Gold: Principles, Methods and Applications;" M. A. Hayat, ed.; Vol. 1, p. 413; Academic Press, San Diego, CA (1991).

  2. Lipka, J. J., Hainfeld, J. F., and Wall, J. S., J. Ultrastruct. Res., 84, 120 (1983).

  3. D"Souza, S. E., et al, J. Biol. Chem., 263, 3943 (1988).

  4. J. E. Beesley, in "Colloidal Gold: Principles, Methods and Applications," M. A. Hayat, ed., Academic Press, New York, 1989; Vol. 1, pp. 421-425.

  5. Wall, J. S., Hainfeld, J. F., Bartlett, P. A., and Singer, S. J.: Ultramicroscopy, 8, 397 (1982).

  6. Moeremans, M. et al., J.Immunol. Meth., 74, 353 (1984).
Contents

View Cart
Tel: 631-205-9490Fax: 631-205-9493US toll free: 877-447-6266
Nanoprobes.com
© 1990-2018 Nanoprobes, Inc. All rights reserved. Sitemap
蚂蚁淘电商平台
ebiomall.com
公司介绍
公司简介
蚂蚁淘(www.ebiomall.cn)是中国大陆目前唯一的生物医疗科研用品B2B跨境交易平台, 该平台由多位经验丰富的生物人和IT人负责运营。蚂蚁淘B2B模式是指客户有采购意向后在蚂蚁 淘搜索全球供应信息,找到合适的产品后在蚂蚁淘下单,然后蚂蚁淘的海外买手进行跨境采购、 运输到中国口岸,最后由蚂蚁淘国内团队报关运输给客户...
蚂蚁淘承诺
正品保证: 全球直采 在线追溯 蚂蚁淘所有产品都是自运营的,我们已经跟国外多家厂方建立品牌推广合作关系, 获得对方的支持和授权; 同时客户可以通过订单详情查看到货物从厂方至客户的所有流程, 确保货物的来源; 正规报关,提供13%增值税发票。
及时交付: 限时必达 畅选无忧 蚂蚁淘的运营团队都是有着多年经验的成员,他们熟悉海外采购、仓储物流、报关等环节; 同时通过在线的流程监控,蚂蚁淘的进口速度比传统企业提高了50%以上, 部分产品甚至能做到7-10天到货,即蚂蚁淘的“时必达”服务。
轻松采购: 在线下单 简单省事 蚂蚁淘的价格是真实透明的,并且具有很大的价格优势,不需要繁杂的询价比价; 报价单与合同可以直接在线生成或打印;就像在京东购物一样, 您的鼠标点击几 次即完成在蚂蚁淘的采购,订单详情会告诉您所有进程。
售后申请: 耐心讲解 优质服务 蚂蚁淘提供的产品在使用过程中如因产品质量问题有售后需求时, 您可通过我的订单提交您的“申请售后”, 蚂蚁淘产品顾问会第一时间为您处理, 在售后服务过程中如遇到问题也可致电蚂蚁淘客服热线:4000-520-616。
常见问题
蚂蚁淘所售产品均为正品吗?
蚂蚁淘的创始人兼CEO是钟定松先生,具有十年的从业经验,在业界享有良好的口碑; Ebiomall是跨境直采平台,我们直接从厂家采购,自己的团队负责国际物流和清关,中间没有第三方,蚂蚁淘承诺所售产品仅为正品,假一罚十。
下单后可以修改订单吗?
未确认状态的订单可以修改,打开“订单详情”页面,点击右上角的“修改订单”即可,若已审核确定,则订单无法修改。
商品几天可以发货?
现货产品付款审核后即可发货,大部分期货产品在3周左右即可到货,提供时必达服务的产品订单审核十天内即可发货。
订单如何取消?
如订单处于未确定状态,进入“我的订单"页面,找到要取消的订单,点击“取消订单”按钮。
可以开发票吗?
本网站所售商品都是正规清关,均开具13%正规发票,发票金额含配送费金额,另有说明的除外。
如何联系商家?
蚂蚁淘任何页面都有在线咨询功能,点击“联系客服”、“咨询”或“在线咨询”按钮,均可咨询蚂蚁淘在线客服人员, 或拨打4000-520-616,除此之外客户可在 联系我们页面找到更多的联系方式。
收到的商品少了/发错了怎么办?
同个订单购买多个商品可能会分为一个以上包裹发出,可能不会同时送达,建议查看订单详情是否是部分发货状态;如未收到,可联系在线客服或者致电4000-520-616。
退换货/维修需要多长时间?
一般情况下,退货处理周期为客户收到产品一个月内(以快递公司显示签收时间为准),包装规格、数量、品种不符,外观毁损、短缺或缺陷,请在收到货24小时内申请退换货;特殊商品以合同条款为准。
商品咨询