Detect O2 for real-time analysis
- Fluorescence-sensing detector for optical sensors, a viable alternative to traditional chemical sensing devices
- Measure fluorescence lifetime, phase and intensity
- LED based photometry makes this unit affordable–Half the cost of comparable phase measurement systems
- Excellent stability, extremely low drift and phase noise
- Simple calibration, setup and control
- Oxygen Monitoring Kit, including:
- Phase measurement system
- Temperature probe
- Select sensor patches when ordering
Options
| Order code | Description |
| FLOX-PATCH | Non-Invasive Oxygen Monitoring Kit, including phase measurement system, temperature probe; select sensor patches when ordering |
| FLOX-PROBE | In Situ Oxygen Monitoring Kit, including phase measurement system, temperature probe; select sensor when ordering |
Benefits
- Self-contained, benchtop system–invariant to fiber bending or stray light
- Easy setup and control, combined with its stability and sensitivity make this unit perfect for long term studies
- Three coatings for probes and patches give you many options
Applications
- Oxygen sensing applications requiring stability and sensitivity to drift which must be undisturbed for lengths of time
- Monitor O₂partial pressure in gas and aqueous solutions and in non-aqueous vapors and solutionsMonitor traces of oxygen in gas and liquids
FLOX is a device for measuring fluorescence lifetime, phase and intensity. It uses LED excitation and photodiode detection with filter-based wavelength selection for easy experimental set-up and control.
Self contained unit
The compact, self-contained unit makes it invariant to fiber bending and stray light. It also has a wide dynamic range of optical intensity, as well as low optical and electronic crosstalk, and low drift and phase noise.
FLOX is especially useful for oxygen sensing applications where stability and sensitivity to drift is important and where sample set-ups must be left undisturbed for long periods of time.
Easy setup, great for long term studies
The new oxygen sensing system measures fluorescence lifetime, phase and intensity, using LED excitation and photodiode detection with filter-based wavelength selection. The system is simple to set-up and control. When stability and sensitivity to drift are important in your oxygen sensing experiment, this unit is ideal. It is perfect for applications where sample set-ups must be left undisturbed for long periods of time.
Three coatings available for probes and patches
The optical sensors consist of transducer materials, applied to the tips of optical fibers or to substrates such as patches or cuvettes, which change optical properties in response to specific analytes in their immediate environment.
OXY–The standard oxygen sensor designed for monitoring oxygen partial pressure in gas and aqueous solutions is a fiber optic fluorescence probe with a proprietary oxygen sensing coated tip.
HIOXY–Designed for monitoring oxygen partial pressure in non-aqueous vapors and solutions. The sensor coating chemistry is compatible with oils, alcohols, and hydrocarbon-based vapors and liquids.
FOSPOR–A new generation of highly sensitive sensor coating can be used for monitoring traces of oxygen in gas and liquids.
The oxygen sensor probes are low-power and offer high sensitivity, reversibility and stability, ideal for remote monitoring. The thin coating on the probe tips consumes no oxygen, allowing for continuous contact with the sample. They are ideal for viscous samples and are immune to interference caused by pH, ionic strength or salinity fluctuations or biofouling.
FLOX software displays oxygen measurements on a connected PC.
| Probe Specifications | OXY Formulation (general-purpose coating) | FOSPOR Formulation (high-sensitivity for low levels of O2) | HIOXY Formulation (for hydrocarbon environments) |
| O2% range (at 1 ATM) | 0-100% | 0-<10% | 0-20.9% |
| DO range (ppm at 1 ATM) | 0-40 ppm | 0-4 ppm | 0-8 ppm |
| Temperature range | -50-+80ºC for probes | 0-+60ºC for probes | -50-+60ºC |
| 0-60 ºC for patches | 0-60ºC for patches | NA | |
| O2% resolution | 100 ppm in gas | 10 ppm in gas | 100 ppm |
| DO resolution (at room temp) | 4 ppb | 0.4 ppb | 4 ppb |
| O2% accuracy | <5% of reading | <5% of reading | <5% of reading |
| DO accuracy | <5% of reading | <5% of reading | <5% of reading |
| Min. detectable level in gas | 0.01% - 0.05% | 0.001% - 0.01% | 0.01% - 0.05% |
| Response time (in gas) | < 1 second | < 30-60 second | < 1 second |
| Response time w/ overcoating in gas | 45-60 seconds | 60-90 seconds | |
| Response time in pure water | 30-45 seconds | 60-90 seconds | ~45 seconds |
| Patch Specifications | OXY Formulation (general-purpose coating) | FOSPOR Formulation (high-sensitivity for low levels of O2) | HIOXY Formulation (for hydrocarbon environments) |
| O2% range (at 1 ATM) | 0-100% | 0-10% | 0-20% |
| DO range (ppm at 1 ATM) | 0-40 ppm | 0-4 ppm | 0-8 ppm |
| Temperature range | -20 to +60 ºC for patches | 0 to +60 ºC for patches | -20 to +60 ºC for patches |
| O2% resolution (20 sec averaging) | 0.05% | 0.01% | |
| (at 30 sec averaging) | 0.05% | ||
| DO resolution (at room temp) | 20 ppb | 4 ppb | 20 ppb |
| O2% accuracy | 5% of reading | 5% of reading | 5% of reading |
| DO accuracy | 5% of reading | 5% of reading | 5% of reading |
| Min. detectable level | 0.1% O2 | 0.01% O2 | |
| (at 30 sec averaging) | 0.1% O2 | ||
| Minimum detectable level in water (room temperature) | 40 ppb | 4 ppb | 40 ppb |
| Response time (in gas) | <1 second | 30-60 seconds | <1 second |
Response time w/ overcoating in gas | ~30-45 seconds | ~60-90 seconds | |
| Response time in pure water | ~45 seconds | ~60-90seconds | ~30-45 seconds |
| Stability (Continuous LED) | OXY Formulation (general-purpose coating) | FOSPOR Formulation (high-sensitivity for low levels of O2) | HIOXY Formulation (for hydrocarbon environments) |
| Lifetime Stability (Tau) | 0.0006 usec/ HR | 0.003 usec/ HR | 0.0002 usec/HR |
| Oxygen Stability % | 0.01% HR | 0.005% HR | 0.007% HR |
| Sterilization Guide | OXY Formulation (general-purpose coating) | FOSPOR Formulation (high-sensitivity for low levels of O2) | HIOXY Formulation (for hydrocarbon environments) |
| Form factor | Probes/Patches | Probes/Patches | Probes |
| Autoclavable | No | Not yet determined | Yes |
| Calibration | Single point reset required after sterilization | ||
| Gamma | Yes | Not yet determined | Yes |
Options Also Available
| AL300 | A 500 µm OD (300 µm core diameter) aluminum-jacketed optical fiber probe for applications that require fine spatial resolution. 300 µm alµminµm-jacketed fiber assembly; 500 µm OD, 1 m length |  |
| OR125 | The OR125 is a 1/8" OD optical fiber probe used as a direct replacement for 1/8" OD O2 electrodes.100 µm optical fiber, stainless steel ferrule; 3.175 mm OD, 63.5 mm length |  |
| P1600 | The PI600 is a silicone-jacketed, polyimide-coated optical fiber probe used in environments where a non-metallic probe is required.200 or 600 µm optical fiber with silicone jacketing; 710 µm OD, 2 m length |  |
| OR125G and OR125GT | These probes are 1/8" OD optical fiber probes used as direct replacement for 1/8" OD O2 electrodes.1000 µm optical fiber, stainless steel ferrule; 3.175 mm OD, 63.5 mm length |  |
| R Sensor Probe | 1000 µm fiber in a stainless steel 1/16" ferrule; 1.587 mm OD, 152.4 mm length |  |
ebiomall.com
