
- Calpain Inhibitor II, ALLM
- MDL 28170
- Acetyl-Calpastatin (184-210) (human)
- Calpain Inhibitor I, ALLN
- Calpeptin
PD 150606Non-peptide calpain inhibitor |
Sample solution is provided at 25 µL, 10mM.
































Quality Control & MSDS
- View current batch:
- Purity = 98.00%
- COA (Certificate Of Analysis)
- MSDS (Material Safety Data Sheet)
- Datasheet
Chemical structure


PD 150606 Dilution Calculator
calculate

PD 150606 Molarity Calculator
calculate
Cas No. | 179528-45-1 | SDF | Download SDF |
Chemical Name | (Z)-3-(4-iodophenyl)-2-sulfanylprop-2-enoic acid | ||
Canonical SMILES | C1=CC(=CC=C1C=C(C(=O)O)S)I | ||
Formula | C9H7IO2S | M.Wt | 306.12 |
Solubility | Soluble in DMSO | Storage | Store at -20°C |
Physical Appearance | An off-white solid | Shipping Condition | Evaluation sample solution : ship with blue ice.All other available size:ship with RT , or blue ice upon request |
General tips | For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.Stock solution can be stored below -20℃ for several months. |
PD 150606 is a specific inhibitor of calpain with Ki value of 0.21 μM and 0.37 μM for mu- and m- calpains, respectively [1].Calpain is an enzyme and plays an important role in a variety of physiological processes, including signaling, cytoskeletal remodeling, regulation of gene expression, apoptosis and cell cycle progression. It has been shown that calpain involves in many pathologies, like muscular dystrophies, cancer, diabetes, Alzheimer"s disease and multiple sclerosis [2] [3].PD 150606 is a potent calpain inhibitor and has similar activity as calpain inhibitor-III. When tested with A2058, A375 and HS578T cell lines infected with ΔPK(resulted the failure of cells growth in 3D culture), administration of PD 150606 in a concentration of 100 μM restored 3D growth in soft sugar culture by inhibiting calpain [2].Treated pathogen-free adult C57BL/6 mice with PD 150606 (3 mg/kg, i.p) before LPS injection to establish sepsis mouse model that had lower myocardial calpain activity, the result showed that PD 150606 prevented the degradation of myocardial Hsp90/p-Akt protein induced by LPS and inhibited myocardial caspase-3 activation and apoptosis [3].References: [1]. Wang, K.K., et al., An alpha-mercaptoacrylic acid derivative is a selective nonpeptide cell-permeable calpain inhibitor and is neuroprotective. Proc Natl Acad Sci U S A, 1996. 93(13): p. 6687-92.[2]. Colunga, A., et al., Calpain-dependent clearance of the autophagy protein p62/SQSTM1 is a contributor to DeltaPK oncolytic activity in melanoma. Gene Ther, 2014. 21(4): p. 371-8.[3]. Li, X., et al., The role of the Hsp90/Akt pathway in myocardial calpain-induced caspase-3 activation and apoptosis during sepsis. BMC Cardiovasc Disord, 2013. 13: p. 8.
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
ELISA双抗体夹心法(enzyme linked immunosorbent assay——sandwich technique)的原理是将特异性抗体结合到固相载体上形成固相抗体,然后和待检血清中的相应抗原结合形成免疫复合物,洗涤后再加酶标记抗体,与免疫复合物中抗原结合形成酶标抗体-抗原-固相抗体复合物,加底物显色,判断抗原含量。
生物帮有相关介绍。编码RNA http://doc.bio1000.com/show-3399.html
1.取出试剂盒室温平衡30min,取出血样放至室温。
2.配标准品:取150uL标准品加入150uL标准品稀释液稀释,依次稀释5次。
3.加样:分别于各反应孔中加入标准品50uL,样品40UL,标准品做复孔,样品做3孔。
4.分别于样品孔中加入10UL抗体。
5.标准品和样品孔中分别加入50uL链酶亲和素-HRP,盖上封板膜,轻轻震荡混匀,37℃温育60min。
6.配洗涤液:将30倍浓缩洗涤液用蒸馏水30倍稀释后备用。
7.洗涤:小心揭开封板膜,弃去液体,甩干,每孔加200uL洗涤液,静置30s后弃去,如此重复5次,拍干。
8.显色:每孔先加入显色剂A 50uL,再加显色剂B 50uL,轻轻震荡混匀,37℃避光显色6min。
9. 终止:每孔加入终止液50uL,终止反应(此时蓝色立即转为黄色)。
10.测定:以空白孔调零,450nm波长依序测量各孔的吸光度。测定应在加终止液10min之内进行。
11.保存结果,收拾桌面。
12.分析处理数据
注意事项
1. 取出板条前恢复到室温后再打开外包装袋,实验中不用的板条立即放回包装中,密闭封口,其余不用试剂应盖好。
2. 实验操作中请使用一次性的吸头,避免交叉污染。
3.实验板孔加入试剂的顺序应一致,以保证所有反应孔的孵育时间一致。
4.洗涤过程中反应孔中残留的洗涤液应在滤纸上充分拍干,勿将滤纸直接放入反应孔中吸水。
5.试剂盒内试剂请在保质期内使用,不同批号试剂不要混用。
6.1000pg/ml以上的结果为非线性的,根据此标准曲线无法得到精确的结果。大于1000pg/ml 的样品应以标准稀释缓冲液稀释后重做。在结果分析时,结合考虑相应的稀释度。
首先要什么有什么的,你得好好考虑一下。
2、看生产地址
根本没有生产地址,我们知道做实验做产品需要很多的仪器、试剂、耗材,没有人相信一间简单的屋子可以生产各种样的试剂盒。
3、看产品包装
没有任何的生产地址、联系方式等信息,这种产品有问题了连个投诉的地方都没有。
4、看公司网站
有些打着国外原装旗号,整个公司网站为英文页面,实际注册IP地址在中国。如果写着国外的地址,让你国外的朋友实地去看一下!
5、做交叉验证
拿对方提供的几个种类的试剂盒,把里面的关键组份相互替换做做实验,如果交叉严重,只能说明是一种原料生产的试剂盒贴了不同的标签。
6、看价格
价格低得离谱,却打着进口大公司原料分装,核算成本,这种低得离谱的价格是连原料都买不起的。
(2)封闭:将已包被的板用洗涤液洗涤2次,每孔加入120 μL封闭液,封闭一段时间,取出,甩干备用。
(3)竞争反应:在制备好的板中每孔加入50 μL系列浓度的标准品溶液和50 μL稀释好的酶标抗体溶液,孵育一段时间。
(4)洗板:用洗涤液洗涤5次。
(5)显色反应:每孔加入显色溶液100 μL,孵育一段时间。
(6)终止:每孔各加入终止液,在酶标仪上测定各孔的吸光值。

