Product Features
Product Name Human VEGF EasyTest™ ELISA Kit Assay Type Solid Phase Sandwich ELISA Format 96-well strip plate Assay Process One wash step, two incubations Assay Length 1.5 hours Sample Volume Serum , Plasma, 50µL Detection Method Colorimetric Sensitivity 20 pg/pg/mL Assay Range 40.9-10000 pg/mL Reactivity Human Cross-Reactivity No cross-reactivity observed with available related molecules Gene Names VEGFA; MVCD1; VEGF; VPF Gene ID 7422 Swissprot ID P15692
Recovery
| Sample Type | Average % Recovery | Range % |
| Serum | 112 | 91-128 |
| Plasma | 97 | 91-108 |
Linearity
| Sample Type | Dilution | % of Expected |
| Serum | 1:2 | 130 |
| 1:4 | 141 | |
| 1:8 | 122 | |
| Plasma | 1:2 | 122 |
| 1:4 | 130 | |
| 1:8 | 123 |
Standard Curve: Human VEGF EasyTest™ ELISA Kit
Kit Components
• Pre-Coated 96-well Strip Microplate • Wash Buffer • Stop Solution • Assay Diluent • Standards • Bioaim human VEGF mix • TMB One-Step Substrate
Protocol Outline
1. Prepare all reagents, samples and standards as instructed in the manual. 2. Add 50 µl of standard or sample to each well. 3. Add 50 µl of Bioaim mix. 4. Incubate 1 h at RT. 5. Wash and add 100 µl of TMB One-Step Substrate Reagent to each well. 6. Incubate 15 min at RT. 7. Add 50 µl of Stop Solution to each well. 8. Read at 450 nm/570 nm.
Background
VEGF (Vascular endothelial growth factor) is a potent mediator of both angiogenesis and vasculogenesis in the fetus and adult. It is required for regulating the proliferation, migration, and survival of embryonic endothelial cells and during wound healing and the female reproductive cycle in adults. Pathologically, it is involved in tumor development and tumor vascular leakage. VEGF binds to VEGF R1/Flt-1, VEGF R2/Flk-1/KDR, and Neuropilin-1. Multiple forms of VEGF are generated by alternative splicing and proteolysis. In addition to binding to VEGFRs, VEGF binds to receptor complexes consisting of both neuropilins and VEGFRs. This receptor complex has increased VEGF signalling activity in endothelial cells. Neuropilins are pleitrophic receptors and therefore other molecules may interfere with the signalling of the NRP/VEGFR receptor complexes.
Storage
The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.
Regulatory Status
Human VEGF EasyTest™ ELISA Kit is for Research Use Only.
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
需要的仪器有：酶标仪、恒温箱、枪、枪头、烧杯、滤纸.当然有自动洗板机最好.
现在国内最差也是用3代试剂，有些地方会用4代试剂。
4代试剂（检查抗原+抗体）——窗口期为4周。因为抗原于3-4周达到复制的峰值，此时通过4代试剂检查，如果感染了HIV，抗原/抗体至少有一个为阳性，如果都是阴就排除了。
3代试剂（只查抗体）——窗口期为6周。
以上为理论分析+临床经验的结果，可以说是99.9%的准确度。
但是目前FDA、CDC和试剂生产商统一达成的共识，也就是针对普通人，最保守的窗口期是3个月。无论什么试剂，3个月都100%排除。
1．取出试剂盒室温平衡30min，取出血样放至室温。
2．配标准品：取150uL标准品加入150uL标准品稀释液稀释，依次稀释5次。
3．加样：分别于各反应孔中加入标准品50uL，样品40UL，标准品做复孔，样品做3孔。
4．分别于样品孔中加入10UL抗体。
5．标准品和样品孔中分别加入50uL链酶亲和素-HRP，盖上封板膜,轻轻震荡混匀，37℃温育60min。
6．配洗涤液：将30倍浓缩洗涤液用蒸馏水30倍稀释后备用。
7．洗涤：小心揭开封板膜，弃去液体，甩干，每孔加200uL洗涤液，静置30s后弃去，如此重复5次，拍干。
8．显色：每孔先加入显色剂A 50uL，再加显色剂B 50uL，轻轻震荡混匀，37℃避光显色6min。
9． 终止：每孔加入终止液50uL，终止反应（此时蓝色立即转为黄色）。
10．测定：以空白孔调零，450nm波长依序测量各孔的吸光度。测定应在加终止液10min之内进行。
11．保存结果，收拾桌面。
12．分析处理数据
注意事项
1. 取出板条前恢复到室温后再打开外包装袋，实验中不用的板条立即放回包装中，密闭封口，其余不用试剂应盖好。
2. 实验操作中请使用一次性的吸头，避免交叉污染。
3．实验板孔加入试剂的顺序应一致，以保证所有反应孔的孵育时间一致。
4．洗涤过程中反应孔中残留的洗涤液应在滤纸上充分拍干，勿将滤纸直接放入反应孔中吸水。
5．试剂盒内试剂请在保质期内使用，不同批号试剂不要混用。
6．1000pg/ml以上的结果为非线性的，根据此标准曲线无法得到精确的结果。大于1000pg/ml 的样品应以标准稀释缓冲液稀释后重做。在结果分析时，结合考虑相应的稀释度。
复习了很多文献在测定方法里面均提到了CV
例如：
Theintra-assaycoefficientofvariationfortheassaywas4-6%.
Theanalyticcoefficientofvariationwas10.2%
问题是：
我是否可以直接使用说明书里的CV值？
如果不可以，我该如何操作进行计算
