
ABT-263 is an orally-available Bcl-2 family inhibitor with Ki values of < 1 nM for Bcl-2, Bcl-xL, and Bcl-w. ABT-263 disrupts key Bcl interactions with proteins such as Bim, inducing apoptosis. Despite being a Bad-like Bh3 mimetic, ABT-263 has been shown to possess cytotoxic activity and induce apoptosis based primarily on its Bcl-2 family inhibitory activity. ABT-263 as a standalone agent has modest activity in lymphoma and myeloma xenografts, but is extremely effective in enhancing the efficacy of clinically relevant therapies such as rituxumab and bortezomib. (1)In a panel of small cell lung cancer (SCLC) xenografts, including H146, H889, and H1963 models, ABT-263 displays excellent antitumor effects, leading to tumor regression. (2)
Technical information:
Chemical Formula: | C47H55ClF3N5O6S3 | |
CAS #: | 923654-51-6 | |
Molecular Weight: | 974.61 | |
Purity: | > 98% | |
Appearance: | white | |
Chemical Name: | (R)-4-(4-((4"-chloro-4,4-dimethyl-3,4,5,6-tetrahydro-[1,1"-biphenyl]-2-yl)methyl)piperazin-1-yl)-N-((4-((4-morpholino-1-(phenylthio)butan-2-yl)amino)-3-((trifluoromethyl)sulfonyl)phenyl)sulfonyl)benzamide | |
Solubility: | Up to 100 mM in DMSO | |
Synonyms: | ABT-263, Navitoclax, ABT263, ABT 263 |
Shipping Condition: The product is shipped in a glass vial at ambient temperature.Storage condition: For longer shelf life, store solid powder at 4oC desiccated, or store DMSO solution at -20oC.
Reference:
1. | Tse et al., ABT-263: A Potent and Orally Bioavailable Bcl-2 Family Inhibitor. Cancer Res. 2008, 68, 3421-3428. Pubmed ID:18451170 |
2. | Shoemaker et al., Activity of the Bcl-2 Family Inhibitor ABT-263 in a Panel of Small Cell Lung Cancer Xenograft Models. Clin. Cancer Res. 2008, 14, 3268-3277. Pubmed ID:18519752 |
Other Information:
Product Specification (pdf) MSDS (pdf) Certificate of Analysis is available upon request.
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
天然产物,大多都有颜色,
存在干扰,多数情况下需要做样品的阴性对照,
尽量能用荧光的方法,
之前我们做过,将两个试剂盒的方法合并后,做的,
效果还可以
2.微孔板:选择实验所需的板条数。剩余不用的部分随同干燥剂密封放回原袋。 1.包被有抗抑制素bB亚单位抗体的微孔板(Anti-InhibinB-CoatedMicrotitrationStrips):96孔,2-8ºC下密封保存。
2.标准品A/样本稀释液(InhibinBStandardA/SampleDiluent):2ml×1瓶,胎牛血清,含0pg/mL二聚体抑制素B。使用前2-8ºC下保存。打开后2-8ºC下可保存2周。于-20ºC可长期保存。
3.标准品B-G(InhibinBStandardsB-G):1ml×6瓶,胎牛血清,含二聚体抑制素B的浓度为10,30,100,250,500,1000pg/mL。使用前2-8ºC下保存。打开后2-8ºC下可保存2周。于-20ºC可长期保存。
4.质控(InhibinBControls):1ml×2瓶,浓度I、II,胎牛血清,含低浓度和高浓度的抑制素A二聚体。使用前2-8ºC下保存。打开后2-8ºC下可保存2周。于-20ºC可长期保存。
5.样本稀释液A(InhibinBSampleBufferA):10ml×1瓶,2-8ºC下保存。
6.样本稀释液B(InhibinBSampleBufferB):10ml×1瓶,2-8ºC下保存。
7.抗体-生物素结合物(InhibinBAntibody-BiotinConjugate)(即用型):10ml×1瓶,含生物素标记的抗抑制素a亚单位抗体。2-8ºC下保存。
8.酶结合物(浓缩)(Streptavidin-EnzymeConjugate)(即用型):10ml×1瓶,含链霉和素-辣根过氧化物酶结合物。2-8ºC下保存。
9.TMB底物溶液(TMBChromogenSolution):15ml×1瓶,2-8ºC下保存。
10.终止液(StoppingSolution):15ml×1瓶,为0.2M的硫酸。2-8ºC下保存。
11.浓缩洗液(WashConcentrate):100ml×1瓶,2-8ºC下保存。 操作前所有试剂都应平衡至室温(~25ºC)并充分混匀。标准品、质控及待测样本需同时做双份。
1.取出实验所需板条,并记录各孔位置。
2.在对应的孔中加入标准品、质控及待测样本各50ul。
3.每孔加入25ul样本稀释液A。
4.每孔加入25ul样本稀释液B。
5.封板,以300-400rpm速度震荡,室温下过夜(14-18小时)。
6.洗板3次,在吸水纸上拍干。
7.每孔加入50ul抗体-生物素结合物。
8.封板,以500-700rpm速度震荡,室温下孵育1.5小时。
9.洗板6次,在吸水纸上拍干。
10.每孔加入50ul链霉和素-辣根过氧化物酶结合物。
11.封板,以500-700rpm速度震荡,室温下孵育20分钟。
12.洗板6次,洗完最后一次以后,将洗液在孔内停留15分钟再除去。在吸水纸上拍干。
13.在每孔中加入100ulTMB底物溶液。
14.以500-700rpm速度震荡,室温下避光孵育15-30分钟。
15.每孔加入100ul终止液。
16.30分钟内在450nm处读数。
注:必须以零标准作空白。如果能做到双波长测定,可在600或620nm处读数,将600(620)nm吸收值从450nm处减去,这样可以减少光学误差。 使用血清样本,静脉穿刺术采集血液。样本于2-8ºC可保存24小时,-20ºC或以下可保存30天。避免反复冻融样本。不应采用溶血或脂血的样本。冰冻的样本在实验前应解冻,并充分混匀。向左转|向右转
RMgX + RX = R-R + MgX2.
这个反应需要的能量比生成格氏试剂的高,
因此降低反应温度是第一个选择。
其次, 增加镁得摩尔比, 让 RX与镁有更多机会反应, 而不是与RMgX。
第三, 降低RX的浓度, 即用更多的溶剂, 因为溶剂和格氏试剂有很显著的溶剂络合。
第四, 缓慢滴加RX., 即降低RX.在反应体系的浓度。
第五, 增加搅拌速率, 即, 让RX.与镁有更好的接触。

