Pricing
| Size | Product code | Size description* | Quantity (EA) | Price |
| Small | M2109A10 | >10 mm2 | 1 | £357.00 |
| Medium | M2109A25 | >25 mm2 | 1 | £578.00 |
| Large** | M2109A00 | >100 mm2 | 1 | £1350.00 |
*typical representative size, areas/dimensions may vary
**item with a lead time of 2-3 weeks, please contact for more information
General Information
| CAS number | 12058-20-7 |
| Chemical formula | MoTe2 |
| Molecular weight | 351.14 g/mol |
| Bandgap | 0.81 - 1.13 eV [1] |
| Synonym | Molybdenum (IV) telluride, Molybdenum telluride |
| Classification / Family | Transition metal dichalcogenides (TMDCs), 2D Semiconductor Materials, Nano-electronics, Nano-photonics, Electrochemical Energy Storage Systems, Topological superconductors, Materials science |
Product Details
| Form | Single Crystal |
| Preparation | Synthetic - Chemical Vapour Transport (CVT) |
| Purity | ≥ 99.999% |
| Structure | Hexagonal |
| Electronic properties | 2D semiconductor |
| Melting point | Decomposes |
| Colour | Metallic black |
General Description
Molybdenum Ditelluride MoTe2 (α-MoTe2) is a semiconductor with an indirect band gap of around 1.0 eV in bulk crystal or powder form, and a direct band-gap of about 1.1 eV in monolayer films. Like MoS2 and other 2D materials, MoTe2 has a layered structure. It is composed of hexagonal sheets of molybdenum atoms - these are located between two hexagonal planes of tellurium atoms. Individual sheets are held together by weak Van der Waals forces, and are stacked with 2H symmetry.
It has a characteristic layered structure direct band-gap that extends to near infrared (NIR) wavelengths. Combined with the advantages of wet chemical exfoliation, MoTe2 has great potential for electronics - especially in photovoltaic technologies.
MoTe2 is also semi-metallic, with bulk MoTe2 exhibiting superconductivity at a transition temperature of 0.10 K.
The hexagonal structure of Molybdenum ditelluride (MoTe2).
Applications
Monolayer or few-layer 2D MoTe2 has a direct band-gap and finds applications in transistors, photo-detectors, and photovoltaics.
Synthesis
Molybdenum ditelluride MoTe2 is manufactured using chemical vapour transport (CVT) crystallisation, with purities in excess of 99.999% achieved.
Usage
Molybdenum ditelluride MoTe2 single crystal can be used to create monolayer and few-layer MoSe2 sheets by mechanical or liquid exfoliation.
Literature and Reviews
- Exfoliated multilayer MoTe2 field-effect transistors, S. Fathipour et al., Appl. Phys. Lett. 105, 192101 (2014); doi: 10.1063/1.4901527.
- Optical Properties and Band Gap of Single- and Few-Layer MoTe2Crystals, C. Ruppert et al., Nano Lett., 14, 6231−6236 (2014); DIO: 10.1021/nl502557g.
- Two-dimensional MoTe2 materials: From synthesis, identification, and charge transport to electronics applications, Y. Chang et al, Jpn. J. Appl. Phys. 55 1102A1 (2016); DIO: 10.7567/JJAP.55.1102A1.
- Unified Description of the Optical Phonon Modes in N‑Layer MoTe2, G. Froehlicher et al., Nano Lett., 15, 6481−6489 (2015); DOI: 10.1021/acs.nanolett.5b02683.
- Fast MoTe2 Waveguide Photodetector with High Sensitivity at Telecommunication Wavelengths, P. Ma et al., ACS Photonics, 5, 1846−1852 (2018); DOI: 10.1021/acsphotonics.8b00068.
- Superconductivity in Weyl semimetal candidate MoTe2, Y. Qi et al., Nat. Commun., 7:11038 (2016); DOI: 10.1038/ncomms11038.
To the best of our knowledge the technical information provided here is accurate. However, Ossila assume no liability for the accuracy of this information. The values provided here are typical at the time of manufacture and may vary over time and from batch to batch.
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
要做细胞缺氧，需要买细胞缺氧盒，但不知道哪里有卖，各位大神有没有曾经做过的，能不能告诉我在哪能购买到，哪个公司有卖。。急。。。。。。实验小白。。。。在下先在此谢过了。
心肌肌钙蛋白I，英文为CardiactroponinI，该试剂盒在POCT领域内几乎是每个厂家都必做的项目，也是多数医院科室都开展的收费项目，市场容量很大，全国一年下来保守估计有3千万人份。但有些厂家销售的特别好，有些厂家销售的很一般。这一是由于销售渠道所致、二是因为产品质量差导致。试剂盒质量差一是因为厂家自身调试工艺不太好，二是由于所选择的抗体质量不好所致。现在市面上有心肌肌钙蛋白I抗体的厂家不多，大概也就不超过10家吧，主要为进口品牌，如：HyTest、BBI、Biospacific、Medix，国产品牌为深圳菲鹏，杭州启泰。其中着重要说的是杭州启泰，这是一家成立7年的抗原、抗体研发公司，公司不大，但立足于自主研发、创新，最近新推出的cTnI抗体可以说是目前国内外最好的抗体，这也算是填补了国内该领域的空白。从事了该行业将近10年，发此贴也是真切希望国内的生物试剂类公司，都专注于研发、创新，做一些好的试剂出来。因为很多事情国内做的并不比国外差的，国内的生物同行请加油吧!
小弟现有一事儿想求助！
如下：1）凋亡的时候细胞色素c由线粒体里释放到胞浆里去的。那么如果能够测到此时在胞浆里的细胞色素c表达增多的话应该就能说明问题了
（2）可此时的问题是如果提胞浆蛋白时把线粒体也裂解了话细胞色素c也会被释放出来，还是会在胞浆里大量表达！就说不清楚是凋亡由线粒体释放的还是被人为的破坏了线粒体导致了的！！！
（3）故我的问题就是该怎么样去除这个人为的影响？怎么说明我测的胞浆里的细胞色素c就是凋亡时线粒体释放的？换句话讲就是如果能够在用细胞裂解液裂解胞浆蛋白时，将线粒体剔除掉？
是不是买个细胞色素c的测试盒就可以了啊？这个盒子有人用过吗，请指教一二！
盼复！非常感谢！
以前先放-80再液氮，但是去-80冰箱有点远，我想能不能直接放液氮里面，我直接放过复苏成活率低了很多，有没有这种冻存盒可以直接放液氮的？
