The reticular fiber silver stain is commonly used to demonstrate reticular fibers. The method developed by Gordon and Sweet made further improvement on the reticulin silver stain. However, these reticulin staining procedures use relatively large volume of staining solutions, are costly, time-consuming, and difficult to achieve consistent results.Hito Reticulin OptimStain™ PAP-Pen Kit offers a simple solution to these problems. This kit is easy to use with simplified procedures. The users can process slides in small quantities of solutions . The staining step can be controlled slide by slide to achieve optimal staining and differentiation for each slide. This kit delivers stable and improved staining quality, with minimal overstains, background and artifacts when used properly.Hito Reticulin OptimStain™ PAP-Pen Kit has been tested on the liver, spleen, pancreas, lung and other tissues from several species of animals and proven to be sensitive for demonstrating the morphological details of reticular fibers. It is a simple solution for your research.
| Kit Contents | for 50 Slides |
| Solution-1 | 20 ml |
| Solution-2 | 20 ml |
| Solution-3 | 20 ml |
| Solution-4A | 10 ml |
| Solution-4B | 10 ml |
| Solution-4C | 10 ml |
| Solution-5 | 20 ml |
| Solution-6 | 20 ml |
| Solution-7 | 20 ml |
| Solution-8 | 20 ml |
| Hito Aqua Barrier PAP Pen | 1 |
| User Manual and MSDS | 1 |
Before using Hito Reticulin OptimStain™ PAP-Pen Kit, please make sure you have the following Required Equipment / Materials in your lab (not included in the kit): Cryostat or Microtome, Light microscopeParaffin embedding equipment (or paraffin sections)Hito Bouin’s Plus Solution (Cat# HTSH0102, for paraffin sections preparation)Dry ice, isopentane, O.C.T. compound (for frozen sections), 4% PFA (Cat# HTSH0101), ethanol, xylene, double distilled or deionized waterSlides, coverslipsStaining jars for slides washResinous mounting medium  Hito Reticulin OptimStain™ PAP-Pen Kit Manual and MSDS | |
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
1. Buffer中离子浓度过大，甘氨酸或者Tris碱有可能疏忽多加了
2.没有加相应浓度的SDS
3.电泳周围温度高，也是一个原因
② 应取pH8.0，这样可使核苷酸带较多负电荷，利于吸附于阴离子交换树脂柱。虽然pH 11.4时核苷酸带有更多的负电荷，但pH过高对分离不利。
③ 当不考虑树脂的非极性吸附时，根据核苷酸负电荷的多少来决定洗脱速度，则洗脱顺序为CMP>AMP> GMP > UMP，但实际上核苷酸和聚苯乙烯阴离子交换树脂之间存在着非极性吸附，嘌呤碱基的非极性吸附是嘧啶碱基的3倍。静电吸附与非极性吸附共同作用的结果使洗脱顺序为：CMP> AMP > UMP >GMP。
但是最好还是不要用，影响实验就不好了。
Tris-Glycine/SDS;
MOPS/SDS;
Bis-Glycine/SDS等不同的缓冲液、预混液等。
不知道这几种缓冲液有什么异同呢？
比如如果是Invitrogen的预制胶-预混液电泳系统，每种预制胶有适配缓冲液，但是如果用其他的缓冲液似乎也可以得到不错的结果，那么是否说明电泳缓冲液只要满足了缓冲ph范围，其他的不是特别重要呢？
此外，附加提问是，PVDF膜在转膜的时候，转膜缓冲液中不需要加入甲醇，那么是加入甲醇转膜效果好还是不加好呢？
谢谢！
我使用的是1%琼脂糖凝胶，电泳缓冲液为0.5×TBE。
请问各位大虾，在不影响实验结果的前提下，这样的含EB的电泳缓冲液可以反复使用多少次？
谢谢^_^
