The MonarchHMW DNA Extraction Kit for Cells & Blood provides a rapid and reliable process for extracting high molecular weight (HMW), intact genomic DNA from cultured cells and whole blood. Utilizing an optimized process that combines gentle cell lysis with a tunable fragment length generation followed by precipitation of the extracted DNA onto the surface of large glass beads, the prep proceeds rapidly and utilizes standard laboratory equipment. DNA size ranges from 50-250 kb for the standard protocol and into the Mb range when the lowest agitation speeds are used. Purified DNA is recovered in high yield with excellent purity, including nearly complete removal of RNA. For cells, the process time is only 30 min, while blood samples require erythrocyte lysis and are processed in 60 min. Purity ratios of 1.80-1.90 and 2.2-2.5 (A260/A280 and A260/A230, respectively), are easily and reproducibly achievable, and purified HMW DNA is suitable for a variety of downstream applications including long-read sequencing (Oxford Nanopore Technologies® and Pacific Biosciences®), optical mapping (Bionano Genomics®), and linked-read genome assembly.
Validated Sample Types
Cells
K293
HeLa
NIH3T3
Jurkat
K562 (suspension cells)
HCT116
A549
U5Os
HepG2
NCI-460
SK-N-SH
Aa23
Blood
Human
Mouse
Rat (fresh only)
Rabbit
Pig
Horse
Cow
Rhesus money
Goat (fresh only)
Sheep (fresh only)
Chicken
Turkey
Visit ourinput guidelines or more information
Figure 1: Workflow for isolation of HMW DNA from cells using the Monarch HMW DNA Extraction KitFigure 2: Workflow for isolation of HMW DNA from blood using the Monarch HMW DNA Extraction KitFigure 3: Reproducible Extraction of HMW DNA from Cells and Blood with the Monarch HMW DNA Extraction KitDNA extracted with Monarch HMW DNA Extraction Kit for Cells & Blood. 1 x 106 fresh HEK293 cells and 500 µl fresh human blood were used as inputs and for preps performed according to the kit instructions using the agitation speed indicated above the gel lanes. 500 ng of DNA from the replicates was resolved by PFGE (1% agarose gel, 6 V/cm, 13°C for 20 hours, switch times ramped from 0.5–94 seconds on a BioRad® CHEF-DR® III System). Yield and purity ratios of the individual preps are shown in the accompanying tables. Lambda PFG Ladder (NEB #N0341) was used as molecular weight standard.Figure 4: Use of varying agitation speeds during lysis produces tunable fragment length of extracted HMW genomic DNA from cells and bloodPreps were performed on duplicate aliquots of 1 x 106 HEK 293 cells and 500 ìl fresh human blood. Samples were agitated at the indicated speed during the lysis step to control the fragmentation of the DNA. Equal amounts of DNA from the replicates (cells: 500 ng; blood: 650 ng) were resolved by PFGE (1% agarose gel, 6 V/cm, 13°C for 20 hours, switch times ramped from 0.5–94 seconds on a BioRad CHEF-DR III System). Yield and purity ratios of the individual preps are shown in the accompanying tables. Lambda PFG Ladder and Lambda DNA-Hind III Digest (NEB #N0341 and #N3012) were used as molecular weight standards. Yield, purity ratios and DINs of the individual preps are shown in the accompanying tables.Figure 5: Linear correlation between DNA yield and input for cell and blood samplesSummarized yield data for HMW DNA preps are shown carried out at 2,000 rpm during lysis, using HEK293 cultured cells and fresh human blood samples from different donors as input material in the corresponding protocols. The starting materials were diluted to 5 different concentrations to cover the entire recommended input range. Cell samples ≤ 5x105 cells and blood samples <500 µl were purified using the recommended volumes for low input samples. Obtained yields show a high degree of linearity over the displayed input range.
This product is related to the following categories:
核糖核酸酶A是内切核糖核酸酶,可特异地攻击RNA上嘧啶残基的3'端,切割与相邻核苷酸形成的磷酸二酯键。反应终产物是嘧啶3'磷酸及末端带嘧啶3'磷酸的寡核苷酸。无辅因子及二价阳离子存在时,核糖核酸酶A的作用可被胎盘RNA酶抑制剂(B1ackburn et al.1977)或氧钒—核糖核苷复合物(Puskas et al.1982)所抑制。核糖核酸酶A用途生化研究,测定核酸的结构RNase 保护检测去除非... 查看更多>
DNase I 是一种核酸内切酶,降解双链或单链DNA,产生5-磷酸末端的单核苷酸及寡核苷酸,在Mg2+存在时,DNase I独立地作用每条DNA链,切割位点是随机分布,在Mn2+存在下,DNase I 作用于DNA双链的大致同一位置,产生钝末端或具1-2个核苷酸突起的DNA片段。来源:牛胰贮存条件:4℃应用:1、用切口平移法进行放射性标记时,可用DNase I在双链DNA上产生随机切口;2、在进行亚硫酸氢盐介导的诱变前,可用DNase... 查看更多>