Description:
1. Intended Use
The GenWay Candida albicans IgG Antibody ELISA Test Kit has been designed for the the detection and the quantitative determination of specific IgG antibodies against Candida albicans in serum and plasma. Further applications in other body fluids are possible and can be requested from the Technical Service of GenWay.
2. General Information
Invasive candidal mycosis (synonyms: candidosis, candidiasis) account for more than 80% of the cases of deep-seated mycoses in Germany. This incidence is similar to those of other industrial countries. The main causative agent is the yeast Candida albicans, which is the only fungal species belonging to the „normal“ microflora. Candida albicans has a low pathogenic potential, which rarely allows it to infect a healthy host. Rather, in immunosuppressed individuals it may cause several diseases as an opportunistic pathogen. In candidal mycosis three types of disease can be distinguished. First, Candida albicans can infect the skin and the mucous membranes of the outer genitals, mouth, respiratory tract and digestion tract. Second, skin and mucous membranes may be infected, encouraged by factors like pregnancy, diabetes mellitus, immunodeficiency and therapies with cytostatics or antibiotics. Third, the infestation of the inner organs, for example the lungs in a Candida sepsis can cause death in immunosuppressed individuals with a cellular immunodeficiency. Serological tests are frequently used to ascertain the clinical significance of Candida spp. isolates. Rising titers of lgG antibodies to Candida albicans may reflect invasive candidiasis in immunocompetent individuals. The detection of IgA and IgM antibodies is important to identify a fresh infection. Immunosuppressed individuals often fail to produce antibodies, so a negative antibody test does not necessarily rule out the disease. In this case the use of an antigen detection test is recommended. Besides the detection of antibodies and antigen, the site of manifestation, the number of colony-forming units, and the concomitant use of antimycotics must be considered.
3. Principle of the Test
The GenWay Candida albicans IgG antibody test kit is based on the principle of the enzyme immunoassay (EIA). Candida albicans antigen is bound on the surface of the microtiter strips. Diluted sample serum or ready-to-use standards are pipetted into the wells of the microtiter plate. A binding between the IgG antibodies of the serum and the immobilized Candida albicans antigen takes place. After a one hour incubation at room temperature, the plate is rinsed with diluted wash solution, in order to remove unbound material. Then ready-to-use anti-human-IgG peroxidase conjugate is added and incubated for 30 minutes. After a further washing step, the substrate (TMB) solution is pipetted and incubated for 20 minutes, inducing the development of a blue dye in the wells. The color development is terminated by the addition of a stop solution, which changes the color from blue to yellow. The resulting dye is measured spectrophotometrically at the wavelength of 450 nm. The concentration of the IgG antibodies is directly proportional to the intensity of the color.
Additional Information:
| Name | Candida albicans IgG ELISA |
|---|---|
| Related Product Names | Candida albicans IgG ELISA |
| Applications | Enzyme immunoassay based on microtiter plate for the detection and quantitative determination of human IgG antibodies against Candida albicans in serum and plasma |
| Intended Use | Research Use Only |
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
1.标准曲线的标准品是否一定要梯度稀释,为什么?我试过非梯度稀释的,也可以达到线性R2=0.99.
2.我用了CurveExpert做标曲,自动搜索后发现有10种提供的方程,各种形式的,其中一个十分适合我的实验结果(LogisticModel),而其他的感觉又不适合,因为结果常常为负值。这又是为啥捏?
3.实验的酶标仪最大OD值可以测到4,如果我的测量结果在1.3,是否像其他人所说的>1了就不准确了。
4.利用夹心法进行定量分析是否一定要使用线性方程?
不好意思啊,一下问了这么多问题,最近做了一个月的ELISA,完全摸不清头脑啊。谢谢各位了
2.加大辣根过氧化物酶标记的链霉亲和素;
大家好,我在做双抗夹心法的elisa实验,已经花了20来天了,然而标准曲线的线性一直做不好,而且不稳定。下面我把具体的实验过程说下,希望大家能给我提个建议,谢谢!
首先我从以下数据中确定了标准品的起始稀释浓度:4.64,46.4,464,4640IU/ml对应的OD为0.55,1.178,1.086,1.168.因此我取46.4IU/ml(300ng/ml)作为标品的起始稀释浓度。然后作了关于单抗,多抗,二抗的合适稀释度的实验,我的数据如下:
123456789
空白0.2290.1920.2120.1540.1390.1730.2360.1770.257
46.4iu/ml1.2421.5271.2691.9641.6281.9592.0051.8802.163
9.28iu/ml0.9680.9501.0131.1360.8731.2461.6971.5861.769
阴性0.1920.1760.2500.1310.1610.1540.1990.2190.244
选取了7号组合单抗,多抗,二抗分别为1ug/ml,1ug/ml,0.5ug/ml。
标品按照以下梯度稀释:46.423.211.65.82.91.450.725iu/ml.以下是我近来做的三组数据,都是相对空白的相对值:
123
46.4iu/ml0.6130.5860.851
23.20.5240.6490.765
11.60.3820.510.663
5.80.3160.3850.567
2.90.2880.3190.37
1.450.2890.1340.303
0.7250.1210.1460.113
空白0.0820.0870.101
阴性0.0820.1050.101
似乎梯度都不明显。我现在疑惑的是我的标品浓度的设置有问题还是之前抗体的浓度选择不合适,请大家多指点,万分感谢!!!
请大家帮帮忙,第一步加完抗原后必须封闭吗
表面抗体是双抗原夹心法
E抗体和核心抗体是竞争抑制法或间接法
1. 包被:用0.05M PH9,碳酸盐包被缓冲液将抗体稀释至蛋白质含量为1~10μg/ml,在每个聚苯乙烯板的反应孔中加0.1ml,4℃过夜。次日,弃去孔内溶液,用洗涤缓冲液洗3次,每次3分钟。
2. 加样:加一定稀释的待检样品0.1ml于上述已包被之反应孔中,置37℃孵育1小时。然后洗涤。(同时做空白孔,阴性对照孔及阳性对照孔)。
3. 加酶标抗体:于各反应孔中,加入新鲜稀释的酶标抗体(经滴定后的稀释度)0.1ml,37℃孵育0.5~1小时,洗涤。
4. 加底物液显色:于各反应孔中加入临时配制的TMB底物溶液0.1ml,37℃10~30分钟。
5. 终止反应:于各反应孔中加入2M硫酸0.05ml。
6. 结果判定:可于白色背景上,直接用肉眼观察结果:反应孔内颜色越深,阳性程度越强,阴性反应为无色或极浅,依据所呈颜色的深浅,以“+”、“-”号表示。也可测OD值:在ELISA检测仪上,于450nm(若以ABTS显色,则410nm)处,以空白对照孔调零后测各孔OD值,若大于规定的阴性对照OD值的2.1倍,即为阳性。
方法二:用于检测未知抗体的间接法:
用包被缓冲液将已知抗原稀释至1~10μg/ml,每孔加0.1ml,4℃过夜。次日洗涤3次。加一定稀释的待检样品(未知抗体)0.1ml于上述已包被之反应孔中,置37℃孵育1小时,洗涤。(同时做空白、阴性及阳性孔对照)于反应孔中,加入新鲜稀释的酶标第二抗体(抗抗体)0.1ml,37℃孵育30~60分钟,洗涤,最后一遍用DDW洗涤。其余步骤同“双抗体夹心法”的4、5、6。

