
The fundamental structure of cell membranes is bilayers composed of phospholipids, and the vital function of the phospholipids in the membrane is to help keep it fluid and semi-permeable. Conventional glycerophospholipids have acyl chains attached to the sn-1 and sn-2 positions of the glycerol backbone via an ester bond. Ether lipids are a unique class of glycerophospholipids that have an alkyl chain attached to the sn-1 position by an ether bond (glycerol-ether lipids). In ether lipids, the alcohol group attached to the phosphate is generally choline or ethanolamine. Ether-linked phospholipids such as 1-alkyl-2-acyl-phosphatidylcholine and dialkylphosphatidylcholine are also found in the plasma and organelle membranes of mammalian species. Ether lipids form approximately 20% of the total phospholipid in mammals with different tissue distribution; brain, heart, spleen and white blood cells have the highest levels, while liver have a very little amount of ether lipids.
Studies on the formation and thermodynamic properties of ether-linked phospholipid bilayer membranes have indicated that in contrast to ester-linked phospholipid, the formation of the non-bilayer structure takes place spontaneously. This is attributed to the weaker interaction between polar headgroups in the ether-linked than that in the ester-linked phospholipids. It has also shown that the phase behavior of the ether-linked phospholipid bilayer membranes in ambient pressure is almost equivalent to that of the ester-linked phospholipid bilayer membranes under high temperatures and pressures, and the difference in the phase behavior decrease as the alkyl-chain length increases.
Due to distinctive properties of ether lipids, liposomes made from ether lipids exhibit very unique characteristics and performance: a) the ether bonds are more stable than ester linkages over a wide range of acidic or alkaline pH; b) stability properties of the liposomes is enhanced by bipolar lipids, and the saturated alkyl chains gives stability towards degradation in oxidative conditions; c) the unusual stereochemistry of the glycerol backbone enhance the resistance against the attacks by other organism phospholipases.
Phospholipase A2 (PLA2) cannot hydrolyze the ether lipid liposomes. Diether lipids do not go through hydrolysis due to having an ether bond instead of an acyl bond and therefore to do that, they are a suitable candidate for experiments that needs to be performed at a higher temperature for an extended period of time. For more information about hydrolysis and oxidation of phospholipids see here.


Saturated diether lipids can neither be hydrolyzed nor oxidized.

ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
荧光定量PCR原理等大家都已经很熟了,我就不细说了,主要是写一些有人问过的事,希望写的内容是大家都关心的。
普通PCR与荧光定量PCR技术区别?
简单的讲PCR技术最早是用于扩增一段特异的PCR片段,用于克隆、测序等实验,后来也将其用于样本中特异的PCR片段有无或非很粗的相对定量,而荧光定量PCR技术则是为了测定样本中特异的PCR片段相对及绝对量,是一种测定特异的PCR片段含量的方式。如测定病人样本中病原体的含量、实验样本中某一特定的mRNA的含量等。
前些年有人讲过普通PCR后,通过电泳也可以进行定量,其实是将PCR产物的定量与PCR样本中模板定量相混了。近两年没有人再讲这类的话了。
SybrGreen、Taqman、Molecularbeacon、LUX这些方法如何选择?
从实验成本来讲,SybrGreen是最好的,基本上就是普通PCR加上一点SybrGreenI荧光染料即可,其信号强度也很好,还可以进行融解曲线分析等,但缺点是只能在一个反应管内进行一种PCR反应的检测,另一个问题是非特异性扩增会影响实验结果,当然也有一些技术解决这些问题,后面会讲到。对于研究人员来讲,如果需要检测的基因很多,而每个反应管中进行一种PCR反应的检测可以满足实验要求,则SybrGreen是最好的选择。
如果需要进行多通道实验,即在一个反应管中进行2种或以上的反应,则要选择其他的方法,最常用的是Taqman、Molecularbeacon,这两种都是探针的方式,由于增加了探针的特异性,因此其扩增曲线反映的就是特异性产物的扩增曲线,不含有非特异性扩增的成分。因此商业用途的检测试剂盒大都采用这一技术,以减少非特异性产物造成错误结论的可能性。其缺点在于探针成本较高,有时设计的探针并不合适,有造成损失的可能性。并且要进行较多的实验条件的优化。这两种探针技术用于商业目的时都有专利问题,据说取得Molecularbeacon的许可权的成本相对较低,但只是据说。
另一种值得一提的是LUX探针,它也可进行多通道实验,但它没有Taqman和Molecularbeacon方法的增加探针特异性的功能,因此只能是一种折中的方案,如果不考虑多通道实验,则不如SybrGreen法.
鼓励性加分
荧光定量PCR原理等大家都已经很熟了,我就不细说了,主要是写一些有人问过的事,希望写的内容是大家都关心的。
普通PCR与荧光定量PCR技术区别?
简单的讲PCR技术最早是用于扩增一段特异的PCR片段,用于克隆、测序等实验,后来也将其用于样本中特异的PCR片段有无或非很粗的相对定量,而荧光定量PCR技术则是为了测定样本中特异的PCR片段相对及绝对量,是一种测定特异的PCR片段含量的方式。如测定病人样本中病原体的含量、实验样本中某一特定的mRNA的含量等。
前些年有人讲过普通PCR后,通过电泳也可以进行定量,其实是将PCR产物的定量与PCR样本中模板定量相混了。近两年没有人再讲这类的话了。
SybrGreen、Taqman、Molecularbeacon、LUX这些方法如何选择?
从实验成本来讲,SybrGreen是最好的,基本上就是普通PCR加上一点SybrGreenI荧光染料即可,其信号强度也很好,还可以进行融解曲线分析等,但缺点是只能在一个反应管内进行一种PCR反应的检测,另一个问题是非特异性扩增会影响实验结果,当然也有一些技术解决这些问题,后面会讲到。对于研究人员来讲,如果需要检测的基因很多,而每个反应管中进行一种PCR反应的检测可以满足实验要求,则SybrGreen是最好的选择。
如果需要进行多通道实验,即在一个反应管中进行2种或以上的反应,则要选择其他的方法,最常用的是Taqman、Molecularbeacon,这两种都是探针的方式,由于增加了探针的特异性,因此其扩增曲线反映的就是特异性产物的扩增曲线,不含有非特异性扩增的成分。因此商业用途的检测试剂盒大都采用这一技术,以减少非特异性产物造成错误结论的可能性。其缺点在于探针成本较高,有时设计的探针并不合适,有造成损失的可能性。并且要进行较多的实验条件的优化。这两种探针技术用于商业目的时都有专利问题,据说取得Molecularbeacon的许可权的成本相对较低,但只是据说。
另一种值得一提的是LUX探针,它也可进行多通道实验,但它没有Taqman和Molecularbeacon方法的增加探针特异性的功能,因此只能是一种折中的方案,如果不考虑多通道实验,则不如SybrGreen法.