Description

Download Product InsertDownload Safety Datasheet (SDS)

Formulation Information

Immunosome®-Folate (PEGylated)

Lipid Composition	Concentration (mg/ml)	Concentration (mM)	Molar Ratio Percentage
Total	15.86 mg/ml	21.55 mM	100
Hydrogenated Soy PC	9.58	12.22	57
Cholesterol	3.19	8.25	38
DSPE-PEG(2000)	2.7	0.96	4.5
DSPE-PEG(2000)-Folate	0.39	0.12	0.5

Conjugation Protocol

Materials and Equipment

In order to conjugate your antibody or protein tagged with FBP to Immunosome®-Folate liposomes you will need:

1. Laboratory vortex mixer is recommended to have.
2. Laboratory magnetic stirrer is needed for dialysis.
3. Float-A-Lyzer® with a proper MWCO that easily allows the cleanup of your liposome conjugated ligand from free and non-conjugated protein/peptide/ligand. You need to make sure that the MWCO is below 1,000,000 dalton. At 1,000,000 dalton, the pore size on the dialysis membrane gets close to 100 nm and therefore your liposomes can be dialyzed out. You cannot use dialysis cassettes blindly. Please understand the technique before using either spin column or dialysis cassette. If you do not use the correct MWCO, you can lose your entire prep. For this protocol, we recommend MWCO of 300,000 dalton.

Preparation Method

1. The total lipid concentration in Immunosome®-Folate is 21.55 mM. 0.5% mol of the lipid in liposomes contains PEG-Folate group and only half of them are exposed to the outside of the liposomes, which is equal to 0.053 mM of reactive conjugatable lipid. For 2 ml volume liposomes, this is equal to 1.08×10^-7 mol, and for 5 ml volume liposomes, this is equal to 2.69×10^-7 mol of PEG-Folate. Add 1:20 molar ratio of antibody tagged with FBP to PEG-Folate lipid.
2. Incubate Immunosome®-Folate with antibody-FBP for 1 hour at room temperature.
3. Remove non-conjugated antibody, protein, peptide or ligand by dialysis. We prefer dialysis to size exclusion columns. Dialysis is a much slower process but there will be minimum loss of immunoliposomes after the prep is cleaned from non-conjugated protein/peptide/ligand. Spin columns are much faster but you can easily lose over 50% of the liposomes on the spin column. We recommend using Float-A-Lyzer® dialysis cassette from Spectrum Labs. You need to choose a cassette with proper MWCO depending on the MW of your protein, ligand, antibody or antibody fragment. NOTE: If you decide to use a dialysis cassette you need to make sure that the MWCO is below 1,000,000 dalton. At 1,000,000 dalton, the pore size on the dialysis membrane gets close to 100 nm and therefore your liposomes can be dialyzed out. You cannot use dialysis cassettes and spin columns blindly. They come in various sizes and you need to choose the correct size wisely. Dialyze the immunoliposome solution in 1 liter of PBS at pH 7.4 for 8 hours. Change the dialysis buffer with a fresh 1 liter of PBS and let is dialyze for another 8 hours. After this step, your cleaned up immunoliposome is ready to be used. If you do not use the correct MWCO, you can lose your entire prep.

Liposome Particle Calculator

Immunosomes are unilamellar liposomes and sized to 100 nm. The molar concentration of liposome is 21.55 mM. By having liposome diameter (nm) and lipid concentration (µM), you can calculate the total number of the lipids in one liposome and the number of the liposomes in one milliliter of the liposome solution. To use the calculator click here.

Technical Notes

• Please keep in mind that the main using for liposomes containing folate on surface is for targeting folate receptors on the cells. Making immunoliposomes using antibodies/proteins or ligands tagged with FBP is a very niche application.
• The immunoliposomes may disassemble following internalization by endocytosis upon exposure to the low pH environment of the endosomal compartment, due to reduced affinity between folate and FBP under low pH. This internalization-triggered uncoupling may be beneficial to delivery of liposomal drug at the cellular level by allowing the sorting of the internalized liposomes to the appropriate subcellular compartment and/or facilitating intracellular release of drug molecules from the liposomes.
• Size exclusion spin columns such as Sepharose® CL-4B can be used instead of Float-A-Lyzer® dialysis cassette. However, a very large amount of liposomes will stick to the column during the cleanup process and therefore we strongly suggest using dialysis than size exclusive beads.
• If you are using a ligand or peptide that is hydrophobic then it is recommended to solubilize it in DMSO or DMF and then add the buffer to it. It is recommended not to use more than 5% volume of DMSO or DMF in the solution. DMF and DMSO are both compatible with liposomes and they are also miscible in water. Other organic solvent such as ethanol and chloroform are not compatible with liposomes and will cause the liposomes to lyse. If you end up using DMSO or DMF then after the conjugation reaction is done, you need to remove DMSO and DMF from the liposomes. In order to do that you need to use a dialysis cassette that is made from REGENERATED CELLULOSE MEMBRANE. NOTE: Not all membranes are compatible with DMF and DMSO. We recommend using a Slide-A-Lyzer™ MINI Dialysis Device with MWCO of 2K made from regenerated cellulose membrane manufactured by ThermoFisher. After DMSO or DMF is removed, you can use Float-A-Lyzer® dialysis device for the final step of cleaning up the prep.
• Liposomes should be kept at 4°C and NEVER be frozen.

Database

Direct link to the database page for easy navigation: Immunoliposomes Conjugation Database

Appearance

Immunosome®-Folate is a white translucent liquid made of nano size unilamellar liposomes. Usually due to the small size of liposomes no settling will occur in the bottom of the vial. The liposomes are packaged in an amber vial. 

Ordering/Shipping Information

• All liposome based formulations are shipped on blue ice at 4°C in insulated packages using overnight shipping or international express shipping.
• Liposomes should NEVER be frozen. Ice crystals that form in the lipid membrane can rupture the membrane, change the size of the liposomes and cause the encapsulated drug to leak out. Liposomes in liquid form should always be kept in the refrigerator.
• Clients who order from outside of the United States of America are responsible for their government import taxes and customs paperwork. Encapsula NanoSciences is NOT responsible for importation fees to countries outside of the United States of America.
• We strongly encourage the clients in Japan, Korea, Taiwan and China to order via a distributor. Tough customs clearance regulations in these countries will cause delay in custom clearance of these perishable formulations if ordered directly through us. Distributors can easily clear the packages from customs. To see the list of the distributors click here.
• Clients ordering from universities and research institutes in Australia should keep in mind that the liposome formulations are made from synthetic material and the formulations do not require a “permit to import quarantine material”. Liposomes are NOT biological products.
• If you would like your institute’s FedEx or DHL account to be charged for shipping, then please provide the account number at the time of ordering.
• Encapsula NanoSciences has no control over delays due to inclement weather or customs clearance delays. You will receive a FedEx or DHL tracking number once your order is confirmed. Contact FedEx or DHL in advance and make sure that the paperwork for customs is done on time. All subsequent shipping inquiries should be directed to Federal Express or DHL.

Storage and Shelf Life

Storage

Immunosome® products should always be stored at in the dark at 4°C, except when brought to room temperature for brief periods prior to animal dosing. DO NOT FREEZE. If the suspension is frozen, the encapsulated drug can be released from the liposomes thus limiting its effectiveness. In addition, the size of the liposomes will also change upon freezing and thawing.

Shelf Life

Immunosome®-Folate is made on daily basis. The batch that is shipped is manufactured on the same day. It is advised to use the products within 4 months of the manufacturing date.

Reference and background reading

Pan X, Lee RJ. Construction of anti-EGFR immunoliposomes via folate–folate binding protein affinity. International journal of pharmaceutics. 2007 May 24;336(2):276-83.