
Type:CoatingBuffer
Applications:E
E=ELISA;FACS;FC=FlowCytometry;FPLC=FastProteinLiquidChromatography;GF=GravityFlow;HPLC=HighPerformanceLiquidChromatography;ICC=Immunocytochemistry;IF=Immunofluorescence;IHC=Immunohistochemistry;IP=Immunoprecipitation;NAC=Non-adherentCellAssays;NB=NeutralizationofBioactivity;SE=SandwichELISA;TPE=TargetedProteinExpression;WB=Westernblotting;;AC=AdherentCellAssays;FM=FluorescentMicsroscopy;;;BSC-CM5=BiacoreSensorChipCM5;BSM=BiosactiveSmallMoleculeorPeptide;CDM=CellDifferentiationMedia;;;;;;HealthandFitness;;;DNAExtraction/Purification;;InvivoLikeAssaysFormat:liquid
Bygeneratingahigherspecificsignal,alowerconcentrationofcoatproteinmaybeneededwhenthisbufferisused,therebysavingvaluablereagents.Thereisafinitequantityofproteinthatmaybecoatedeffectivelyontomicrotiterplates. Useofproteinconcentrationsinexcessoftheoptimalrangewillresultinsurfacesaturationandclumpingontheplatesurface. Thisproduceslowerspecificsignals,andhighernonspecificsignals.
Thecoatingbuffercontainsanantimicrobialagenttoretardbacterialgrowthduringtheplatecoatingprocess,allowingtheproceduretobeperformedatroomtemperature.Dependingontheactivityofthecoatedprotein,platesmaybestoredat2°-8°C(orevenatroomtemperatureforhardyproteins)forseveralmonths,orevenyears.
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
最好是测浓度,一般不超过30-40ug,上样缓冲液一般4×或者5×,这个没太大区别。
蛋白质上样缓冲液中的SDS和DTT分别可以屏蔽蛋白质电荷以及破坏二硫键,避免形成多聚体。
DNA上样缓冲液主要是起沉降和指示作用,不可用于蛋白,否则会影响蛋白相对分子量定量。
同样蛋白上样缓冲液中的tris-HCl浓度过高也会使溴酚蓝条带扭曲。
2乘SDS-PAGE上样缓冲液(20ml体系)
1.0mol/L Tris-HCL (pH 6.8) 2ml
1.0mol/L DTT 4ml
SDS 0.8g
溴芬蓝 0.04g
甘油 4ml
dd水 定容至20ml
4℃冰箱保存,可以不分装,我们实验室一般用三个月以上
先配1.0mol/L的DTT,双蒸无菌水溶解4℃冰箱保存,配上样缓冲液的时候加入就可以了,都混匀保存也没问题的
0.5 M tris-HCl (pH 6.8) 20%
丙三醇 20%
20%SDS 20%
0.1%溴酚兰 5%
2-巯基乙醇 10%
双蒸水 25%
不调PH值,PH在配0.5 M tris-HCl 时已调,缓冲液呈蓝紫色。
1。称量氨基丁三醇 242g,Na2EDTA.2H2O 37.2g 于1L烧杯中;
2。向烧杯中加入约600ml去离子水,充分搅拌均匀;
3。加入57.1ml的冰乙酸,充分溶解;
4。用NaOH调pH至8.3,加去离子水定容至1L后,室温保存。
使用时稀释50倍 即1×TAE Buffer
10×TBE Buffer配制方法:
1。称量氨基丁三醇 108g,Na2EDTA.2H2O 7.44g,硼酸55g 于1L烧杯中;
2。加入约700ml去离子水,搅拌均匀;
3。用NaOH调pH至8.3,加去离子水定容至1L后,室温保存。
使用时稀释10倍 即1×TBE Buffer
1mol/l Tirs-HCl(PH8.8) 0.6ml
10%SDS 2ml
50%甘油 5ml
2-巯基乙醇 0.5ml
1%溴酚兰 1ml
水 0.9ml
另外:SDS不好溶解建议加热溶解,如果要做非还原SDS-PAGE请将2-巯基乙醇 0.5ml换成超纯水即可

