
Intended Use:
Test Label: Biotin labeled primer / Fam labeled probeTest Format: AmplifyRP® Acceler8®
AmplifyRP® Acceler8® for PPV is a rapid RNA amplification and detection platform designed for field-based or laboratory testing of prunus crops for Plum pox virus.
Plum pox virus (Sharka disease) is an aphid transmitted potyvirus that can cause significant loss of yield and marketability of stone fruit (peaches, plum, cherry, etc). PPV is found around the world and is of particular importance in Europe and other Mediterranean regions. PPV detections have been confirmed in the U.S. and Canada in the late 1990"s and early 2000"s which instigated large scale testing and eradication programs due to the severity of the disease.
AmplifyRP® Acceler8® enables users to rapidly amplify and test for PPV RNA at a single operating temperature using only a crude sample extract. Amplified product is then tested in an Amplicon Detection Chamber where clear "yes / no" results are read visually on a lateral flow strip (much like a pregnancy test).The entire testing process can be completed in as little as 30 minutes by users of any skill level.
AmplifyRP® Acceler8® for PPV was designed to run in GEB4 extraction buffer; the same extraction buffer used in Agdia"s PPV ELISA (USDA approved screening method for PPV) as well as the ImmunoStrip®.This allows molecular confirmation of ELISA or ImmunoStrip® results from the exact same plant extract.
AmplifyRP® Acceler8® for PPV detects ALL known strains of the virus including PPV-An, PPV-C, PPV-CR, PPV-D, PPV-EA, PPV-M, PPV-Rec, PPV-T, and PPV-W.
Includes:
- Acceler8® reaction pellets (8)
- Amplicon detection chambers (8)
- PD1 Pellet diluent (1.0 ml)
- GEB4 sample extraction bags (8)
- 1µl transfer loops (10)
- User Guide
NOTE: First time users of AmplifyRP® Acceler8® technology will need to purchase a starter pack that includes necessary equipment to perform assays. See related items for more details.
The reaction pellets contained in this kit must be stored in a freezer (-20°C) upon receipt.
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
步骤
A. 真核细胞和组织
自己需要的材料:
β-巯基乙醇、70%乙醇(DEPC水配置)、除RNase的枪头和EP管。
材料的最佳量
想得到最佳的产量和好的Hibind RNA柱的纯化效果,选用正确的细胞和组织量是最重要的。Hibind RNA柱的最大处理量是可变的,根据细胞和组织的类型。最大的结合能力是100ug的RNA。TRK裂解缓冲液的最大裂解能力是1*107个细胞或30mg的组织。
细胞的步骤
1. 用500ul的TRK裂解缓冲液裂解细胞(≤1*107),使细胞团松散,轻轻弹EP管或者用枪头吹旋,再用漩涡振荡混匀。
a) 使用前每1ml TRK裂解缓冲液加入20ul的β-巯基乙醇。
b) 如果是单层的组织培养细胞(成纤维细胞,内皮细胞等),可以直接在细胞培养器里裂解细胞。完全吸去培养基后直接加TRK裂解缓冲液至细胞中。加700ul的TRK到T35细颈瓶或250px的培养皿中,更小的培养器加500ul的TRK。将液体布满整个器皿表面,确保细胞裂解完全。将裂解产物转移至1.5mlEP管中。
c) 如果细胞是悬液培养,收集细胞(≤1,500rpm or 400*g)*5min,弃上清,加入TRK裂解液,漩涡振荡混匀,转移到1.5ml EP管中,进行步骤2。
2. 匀浆化裂解产物
“裂解和匀浆化样品”-第四页有详细的说明,如果细胞≤1*105,漩涡振荡1min。不完全使样品匀浆化会显著的减少RNA的产量还容易造成柱子堵塞。
a) 用匀浆器30 s,使样品匀浆化。
b) 用钝的针头的注射器(0.9mm直径),至少吹打5次是样品匀浆化。注射器要除RNase。
3. 将匀浆后的裂解产物转移至Homogenization Spin Column中,离心,≥1,4000*g, 3min,室温。将离心收集的流出液转移到新的EP管中。转到总RNA分离中第4步。
组织的步骤:
1. 用500ul的TRK裂解缓冲液裂解细胞(≤30mg),使用前每1ml TRK裂解缓冲液加入20ul的β-巯基乙醇。
500ulTRK裂解液最大裂解能力30mg,难破碎的组织大于20mg就用700ul的TRK裂解液。当组织量超出建议的最大量时,也不要超过40mg。
组织样品匀浆化参照第四页选择一种方法只用,除非是使用液氮,
2. 离心,≥1,5000*g, 5min, 室温。
3. 转移上清至,Homogenization Spin Column中,离心,≥1,3000*g, 3min,室温。将离心收集的流出液转移到新的EP管中。
总RNA分离:
4. 在裂解产物中加入50%体积(250ul-350ul)的无水乙醇(96%-100%)混匀,漩涡振荡20s。
5. 样品转移到Hibind RNA Mini column上,离心管的最大容量为750ul,加完乙醇后可能会形成沉淀。所以要充分振荡将所有的混合液加入到柱子上。室温离心,10,000*g,0.5-1min。弃去流出液(透过柱子流出到离心管里的液体)。
6. 将柱子放在一个新的2ml收集管中,加上300ul RNA wash buffer I。室温离心,10,000*g, 0.5-1min。同样弃掉流出液。
7. DNase I 消化(选择性)
在我的实验中没有做这一步。
8. 将柱子再放到一个新的2ml收集管中,加入400ul RNA wash buffer I, 室温离心,10,000*g, 30s,弃流出液。
9. 将柱子放到2ml收集管中,加入500ul RNA wash buffer II(乙醇稀释过的),室温离心,10,000*g, 30s,弃流出液。注意:使用前RNA wash buffer II 必须要用无水乙醇稀释(48ml),按照标签上的说明。
10. 用500ul RNA wash buffer II洗涤一次柱子,同上一步骤一样。室温离心,10,000*g, 30s,弃流出液。然后在空收集管中,以最大转速离心柱子,≥12,000*g, 2min, 室温,使的HiBind 基质完全干燥。
11. 转移柱子到一个新的1.5ml的Ep管中,(试剂盒中没有提供),加入50-100ul的DEPC水洗脱柱子(试剂盒中提供)。确保水直接加到了柱子的基质上。10,000*, 1min, 室温。如果RNA的总量大于30ug,可以进行二次洗脱。
注意:可以选择性地,用大一点的体积洗脱RNA。如果进行二次洗脱,总RNA的量会增加,但是浓度会降低,因为80%以上的RNA会在第一次时被回收。在加柱子前将水加热到65℃并室温孵育柱子5min会增加产量。
大家都用过哪些DNA提取试剂盒,能不能推荐几种
"为了能及时给您提供服务,保证实验的顺利完成,请直接拨打电话或者发送企业邮件
北京博凌科为生物科技有限公司 -- 北京亦庄经济技术开发区康定街6号 "
这里有关于miRNA专题报道,可以看看

