T-FloLocTM 2% Tetra-EDTA Flush and Lock Solution
PREMIUM catheter flushing and locking solution offering both patency and infection control.
· Provides Broad-Spectrum Activity - effective against gram positive & gram-negative bacteria and fungi associated with catheter-related infections
· Prevents and Eradicates Biofilm - eliminates protected microbial colonization of catheters effectively reducing the risk of catheter-related infection
· Effective Anticoagulant - promotes catheter patency; avoids systemic anticoagulation associated with heparin
· Favorable Safety Profile - non-toxic; no topical or systemic effects are known
· No Development of Resistance - does not induce development of drug-resistant bacterial strains
NOTE: each syringe is sterile packaged, suitable for sterile field use
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
碳酸氢钠溶液是一种co2缓冲液,当瓶内二氧化碳量减少时,碳酸氢钠溶液释放co2,反之吸收co2.因此它能保持瓶内二氧化碳量大致不变.
求采纳为满意回答。
1、 缓冲溶液对反应物的测定没有干扰
2、缓冲组分的浓度为1:1
3、有足够的缓冲容量
4、缓冲溶液的PH应在所需范围内
5、组成缓冲溶液的弱碱PKB和弱酸PKA应接近或等于所需的POH值或PH值(PH+POH=14)
配制
只要知道缓冲对的PH值,和要配制的缓冲液的pH值(及要求的缓冲液总浓度),就能按公式计算[盐]和[酸]的量。这个算法涉及对数换算,较麻烦,前人为减少后人的计算麻烦,已为我们总结出pH值与缓冲液对离子用量的关系并列出了表格。只要我们知道要配制的缓冲液的pH,经查表便可计算出所用缓冲剂的比例和用量。例如配制500nmpH5.8浓度为0.1M磷酸缓冲液。
经查表知pH5.8浓度为0.2M Na2HPO48.0毫升,而0.2M Na2HPO492.0毫升。依此可推论出配制100ml0.1M的磷酸缓冲液需要0.1M Na2HPO48.0毫升,而0.1M Na2HPO4需要92.0毫升。
计算好后,按计算结果准确称好固态化学成分,放于烧杯中,加少量蒸馏水溶解,转移入50ml容量瓶,加蒸馏水至刻度,摇匀,就能得到所需的缓冲液。
各种缓冲溶液的配制,均按表格按比例混合,某些试剂,必须标定配成准确浓度才能进行,如醋酸、氢氧化钠等。另外,所有缓冲溶剂的配制计量都能从以上的算式准确获得。

