Direct PCR [3G]
- Amplify directly from whole blood, animal and plants
- Skip DNA purification
- Various genotyping
- Prevention of carryover contamination
Products
| Cat.No. | Product | Size |
|---|---|---|
| DPR200 | HelixAmp™ Direct PCR [3G] | 200 rxns |
| DPRU200 | HelixAmp™ Direct PCR [3G] [Containing UDG/dUTP] | 200 rxns |
| DPRH200 | HelixAmp™ Direct PCR [3G] (Hot-start) | 200 rxns |
| DPRHU200 | HelixAmp™ Direct PCR [3G] (Hot-start) [Containing UDG/dUTP] | 200 rxns |
- Description
- Data
- Details
- Documents
HelixAmp™ Direct PCR [3G] is designed for the PCR amplification directly from animal tissues, whole blood, and plant tissues without any DNA purification processes. This kit contains a 2x reaction mix including Taq DNA polymerase, dNTPs, MgCl2, and unique buffer system to resist various PCR inhibitors of tissue samples. HelixAmp™ Direct PCR [3G] (Hot-start) is including hot-start Taq DNA polymerase that is inactive at lower temperature by an inhibitory antibody and using this enzyme avoids the polymerization from non-specifically bound primers during the setting of PCR mix and at the start of PCR cycles. At high temperature of the initial denaturation step of PCR, the inhibitory antibody is released by denaturation and the free Taq DNA polymerase becomes active. NanoHelix’s Direct PCR [3G] is based on Taq polymerase. Due to this enzyme’s robust amplification and 3’ to 5’ exo-negative properties, this kit could be used for allele specific PCR which is routinely used for various genotyping. Moreover the Uracil-DNA glycosylase with dUTP system for the prevention of carryover contamination can be applied to this Taq polymerase-based kit. dUTP could not be used with the Pfu DNA polymerase and its derivatives. A Uracil-DNA glycosylase and dUTP applied version is also available.
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
碳酸氢钠溶液是一种co2缓冲液,当瓶内二氧化碳量减少时,碳酸氢钠溶液释放co2,反之吸收co2.因此它能保持瓶内二氧化碳量大致不变.
求采纳为满意回答。
1、 缓冲溶液对反应物的测定没有干扰
2、缓冲组分的浓度为1:1
3、有足够的缓冲容量
4、缓冲溶液的PH应在所需范围内
5、组成缓冲溶液的弱碱PKB和弱酸PKA应接近或等于所需的POH值或PH值(PH+POH=14)
配制
只要知道缓冲对的PH值,和要配制的缓冲液的pH值(及要求的缓冲液总浓度),就能按公式计算[盐]和[酸]的量。这个算法涉及对数换算,较麻烦,前人为减少后人的计算麻烦,已为我们总结出pH值与缓冲液对离子用量的关系并列出了表格。只要我们知道要配制的缓冲液的pH,经查表便可计算出所用缓冲剂的比例和用量。例如配制500nmpH5.8浓度为0.1M磷酸缓冲液。
经查表知pH5.8浓度为0.2M Na2HPO48.0毫升,而0.2M Na2HPO492.0毫升。依此可推论出配制100ml0.1M的磷酸缓冲液需要0.1M Na2HPO48.0毫升,而0.1M Na2HPO4需要92.0毫升。
计算好后,按计算结果准确称好固态化学成分,放于烧杯中,加少量蒸馏水溶解,转移入50ml容量瓶,加蒸馏水至刻度,摇匀,就能得到所需的缓冲液。
各种缓冲溶液的配制,均按表格按比例混合,某些试剂,必须标定配成准确浓度才能进行,如醋酸、氢氧化钠等。另外,所有缓冲溶剂的配制计量都能从以上的算式准确获得。


