
7-hydroxycoumarinyl Arachidonatesubstrate for cPLA2 |
Sample solution is provided at 25 µL, 10mM.
































Quality Control & MSDS
- View current batch:
- Purity = 98.00%
- COA (Certificate Of Analysis)
- MSDS (Material Safety Data Sheet)
- Datasheet
Chemical structure


7-hydroxycoumarinyl Arachidonate Dilution Calculator
calculate

7-hydroxycoumarinyl Arachidonate Molarity Calculator
calculate
Cas No. | 161180-11-6 | SDF | Download SDF |
Synonyms | Umbelliferyl Arachidonate | ||
Chemical Name | 5Z,8Z,11Z,14Z-eicosatetraenoic acid, 2-oxo-2H-1-benzopyran-7-yl ester | ||
Canonical SMILES | CCCCC/C=CC/C=CC/C=CC/C=CCCCC(=O)Oc1ccc2ccc(=O)oc2c1 | ||
Formula | C29H36O4 | M.Wt | 448.6 |
Solubility | ≤25mg/ml in DMSO;50mg/ml in dimethyl formamide | Storage | Store at -20°C |
Physical Appearance | A solution in ethanol | Shipping Condition | Evaluation sample solution : ship with blue ice.All other available size:ship with RT , or blue ice upon request |
General tips | For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.Stock solution can be stored below -20℃ for several months. |
7-hydroxycoumarinyl-arachidonate (7-HCA), a fluorogenic substrate for monoacylglycerol lipase (MAGL), can be used with MAGL as a novel fluorescence-based assay to screen small molecule inhibitors of MAGL.
MAGL protein catalyzed the hydrolysis of 7-HCA to generate arachidonic acid and the highly fluorescent 7-hydroxyl coumarin (7-HC). 7-hydroxycoumarin (7-HC) can be monitored spectrophotometrically (excitation at 335 nm, emission at 450 nm). Release of 7-HC was measured using a fluorometer. MAGL protein catalyzed the hydrolysis of 7-HCA with an apparent Km of 9.8 μM and Vmax of 1.7 mmol/min/mg of protein. The assay is specific for MAGL as assay buffer alone or heat-denatured MAGL protein showed no significant activity against 7-HCA [1]. 7-hydroxycoumarinyl Arachidonate is the arachidonic acid ester of 7-hydroxycoumarin (umbelliferone) and can be used as a substrate for cPLA2. Hydrolysis of 7-hydroxycoumarinyl arachidonate by phospholipase resulted in the release of the fluorescent compound [2,3].
References:[1]. Wang Y, Chanda P, Jones P G, et al. A fluorescence-based assay for monoacylglycerol lipase compatible with inhibitor screening[J]. Assay and drug development technologies, 2008, 6(3): 387-393.[2]. Huang Z, Laliberte F, Tremblay N M, et al. A continuous fluorescence-based assay for the human high-molecular-weight cytosolic phospholipase A2[J]. Analytical biochemistry, 1994, 222(1): 110-115.[3]. Pickard R T, Chiou X G, Strifler B A, et al. Identification of essential residues for the catalytic function of 85-kDa cytosolic phospholipase A2 Probing the role of histidine, aspartic acid, cysteine, and arginine[J]. Journal of Biological Chemistry, 1996, 271(32): 19225-19231.
ebiomall.com






>
>
>
>
>
>
>
>
>
>
>
>
求有经验的大神指教,我的载体和目的基因连不上,转化不到大肠中,比例为1:3。另外,为啥胶回收后的载体浓度那么低,大约6ng/ul了,影响连接么?
连接酶通常是包括“连接酶”这个字,就如DNA连接酶是将脱氧核糖核酸(DNA)片段连接。其他普遍的名称包括“合成酶”,因为这些酶是用作合成新的分子,或当它们是将二氧化碳加入一个分子时则称为“羧化酶”。
菌体构建时,目的基因连接在T载体上,测序也正确,但是将目的基因还有载体分别双酶切后总是连接不上,将连接后产物跑核酸胶,什么也没有,不知道是什么原因?我的目的基因浓度为9ng/ul,载体回收后的浓度为6ng/ul,是因为浓度太低的原因吗?还有就是连接有目的基因的T载体双酶切后出现了三条带,这个又是什么原因呢?希望得到解答
DNA连接酶主要是连接DNA片段之间的磷酸二酯键最初从原核生物(大肠杆菌)分离得到的.现在生物基因工程主要是从T4噬菌体中分离得到的,
大家有用过Invitrogen的T4连接酶吗?说明书上是23-26度连接,一般的连接酶不都是16度吗?应该用多少度呢?另外,说明书上还说连接后为了达到更好的转化效率,应将连接反应液至少稀释5倍再转化,是这样吗?谢谢大家帮忙啊
DNA连接酶:可以连接被限制酶切割开磷酸二酯键
产生这一现象的原因在于 DNA合成酶只能沿5'-3'的方向合成DNA 而DNA本身的两条链又是反向分布的 所以就造成了只有一条链合成可以连续地进行下去(以它为模板的子链生成方向正好是DNA聚合酶可以直接提供的) 而后随链要盘绕成回环 反扭过来 才能合成
再合成起始的时候 DNA聚合酶是需要一段RNA引物的 在原核生物中这一引物是由dnaQ(一种酶)在已解旋的单链5'端合成,真核生物中也有对应的酶 由于后随链的合成不连续 所以每个片段都要有引物 在DNA合成结束的时候 这些引物要被切除 因而留下缺口 这时又要特定的酶去填补缺口(比如 大肠杆菌中的DNA聚合酶I)可是填补序列和周围序列间会有缺刻 也就是说他们交界处的3'-5'磷酸二脂键是断开的 这时需要DNA连接酶发挥作用 将其连好
所以 后随链上的缺刻多 还真够DNA连接酶忙一阵的 前导链上只有一开始有RNA引物 因此 最后也基本只有这个地方会用到连接酶

