- Description
- Additional
Description
Details
Description:Rat monoclonal antibody to mouse cluster of differentiation 4 (CD4) antigen
Purification: Prootein G affinity purified
Product Type:Primary antibody
Target Protein:Murine T-cell surface antigen CD4 marker
Immunogen:Mouse T-lymphocytes
Specificity:Reactive with murine T-cell surface antigen CD4 marker that is expressed by the helper/inducer subset of mouse T cells.
Species Reactivity:React with mouse CD4. Cross reaction with human T-cells was not found.
Host / Isotype:Rat, IgG2b
Formulation:Lyophilized from a solution in 0.01M PBS pH7.2
Reconstitution:Double distillated water is recommended to adjust the final concentration to 1.00 mg/mL.
Storage: Store at -20oC
Research Area:Immunology
Background:
CD4 is a glycoprotein surface marker expressed by T helper cells, regulatory T cells and some memory T cells, B cells, monocytes, macrophage and dendritic cells. CD4 assists the communication of T-cells with antigen presentation cells by binding to MHC class II on the surface of antigen presenting cells. CD4 also arguments T cell activation by associating with T cell receptor and assisting signal transduction through its intra-celluar domain. Human immunodeficiency virus (HIV) inhibits immunity by entering lymphocytes through CD4 receptor and destroying these cells.
Applications:Indirect ELISA
References:
If research is published using this product, please inform Anogen in order to cite the reference on this datasheet. Anogen will provide one unit of product in the same category as gratitude.
Additional
Additional Information
Product Specificity | Rat anti-Mouse CD4, JXYT4 |
---|---|
Application | EIA |
Size | 0.1 mg |
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
不知道发在这里合适不,实在是求助无门啊!版主手下留情。
百泰派克公司采用Thermo Fisher的Q ExactiveHF质谱平台,Orbitrap Fusion质谱平台,Orbitrap Fusion Lumos质谱平台结合Nano-LC,推出基于iTRAQ的定量蛋白组分析服务技术包裹,您只需要将您的实验目的告诉我们并将您的蛋白寄给我们,我们会负责项目后续所有事宜,包括蛋白酶切、肽段标价、肽段分离、质谱分析、质谱原始数据分析、生物信息学分析。
一、探针DNA标记方法
步骤 :
1.10ng~3ugDNA每管,双蒸水定量至总体积15ul
2.沸水水浴10分钟后迅速冰浴
3.加入 5号试剂 2ul , 6号试剂 2ul ,7号试剂 1ul
4.37度1小时~20小时
5.中止反应 加2ul 0.2M EDTA (pH 8.0) 和/或 65度 水浴 10分钟
二、标记效率检测
(一) 试剂配置
Solution Composition Preparation
Washing buffer 0.1 M Maleic acid, 0.15 M NaCl; pH 7.5 (20° C); 0.3% (v/v) Tween 20
Maleic acid buffer 0.1 M Maleic acid, 0.15 M NaCl; adjustwith NaOH (solid) to pH 7.5 (20° C)
Detection buffer 0.1 M Tris-HCl, 0.1 M NaCl, pH 9.5 (20° C)
TE-buffer 10 mM Tris-HCl, 1 mM EDTA, pH 8.0
Blocking stock solution Dissolve Blocking reagent (bottle 10) 10% (w/v) in Maleic
(10 × conc.) acid buffer underconstantly stirring on a heating block(65°C) or heat in a microwave oven,autoclave. The solution remains opaque
Blocking solution Prepare a 1 × working solution by dilutingthe 10 × Blocking solution 1:10in Maleic acid buffer.
Antibody solution Centrifuge Anti-Digoxigenin-AP(vial 8) for 5 min at 10 000 rpm in theoriginal vial prior to each use, and pipet the necessary amount carefully from thesurface. Dilute Anti-
Digoxigenin-AP 1: 5 000 (150 mU/ml) in Blocking solution.
Colorsubstrate Add 40 _l of NBT/BCIP (vial 9) to 2 ml of Detection buffer.
solution Note: Store protected from light!
(二)对照的标记DNA(4号试剂)系列稀释
(三)步骤
1、取以上制备的管2~9各1ul,以及自己标记的探针1ul,点到一小片尼龙膜
2、通过紫外线或者120度半小时使核酸交连到膜上
3、膜置塑料盒中加Maleic acid buffer 20ml ,15~25度轻摇孵育2分钟
4、10ml Blocking solution 孵育30分钟
5、10ml Antibody solution 孵育30分钟
6、10ml Washing buffer 洗2次,每次15分钟
7、10ml Detection buffer中平衡2~5分钟
8、膜在2ml新鲜配制的 Colorsubstrate solution 中避光孵育。显色期间避免摇动
9、中止反应 用TE-buffer或者双蒸水洗5分钟
蛋白酶K预处理
三、样品检测与杂交
(一) 步骤
1、 稀释供试品及阳性对照DNA,点膜
2、 通过紫外线或者120度半小时使核酸交连到膜上
3、 将标记好的探针稀释到约25ng/ml, 煮沸5分钟后迅速冰浴
4、膜放入预热好的预杂交液(3.5ml/100cm2)中,充分混匀,避免起泡
5、倒掉预杂交液,加入杂交液及已变性的探针。杂交温度下至少孵育6小时
四、洗膜
1、2 × SSC, 0.1% SDS , 15-25° C,洗膜2次,每次5分钟。
2、0.5× SSC, 0.1% SDS ,预热至65~68° C,洗膜2次,每次5分钟
五、结果检测
(一) 试剂配制
Solution Composition Preparation
Washing buffer 0.1 M Maleic acid, 0.15 M NaCl; pH 7.5 (20° C); 0.3% (v/v) Tween 20
Maleic acid buffer 0.1 M Maleic acid, 0.15 M NaCl; adjustwith NaOH (solid) to pH 7.5 (20° C)
Detection buffer 0.1 M Tris-HCl, 0.1 M NaCl, pH 9.5 (20° C)
TE-buffer 10 mM Tris-HCl, 1 mM EDTA, pH 8.0
Blocking stock solution Dissolve Blocking reagent (bottle 10) 10% (w/v) in Maleic
(10 × conc.) acid buffer underconstantly stirring on a heating block(65°C) or heat in a microwave oven,autoclave. The solution remains opaque
Blocking solution Prepare a 1 × working solution by dilutingthe 10 × Blocking solution1:10in Maleic acid buffer.
Antibody solution Centrifuge Anti-Digoxigenin-AP(vial 8) for 5 min at 10 000 rpm in theoriginal vial prior to each use, and pipet the necessary amount carefully from thesurface. Dilute Anti-
Digoxigenin-AP 1: 5 000 (150 mU/ml) in Blocking solution.
Colorsubstrate Add 40 _l of NBT/BCIP (vial 9) to 2 ml of Detection buffer.
solution Note: Store protected from light!
(二) 步骤
1、Washing buffer洗膜1~5分钟
2、100ml Blocking solution 孵育30分钟
3、20ml Antibody solution 孵育30分钟
4、100ml Washing buffer 洗2次,每次15分钟
5、20ml Detection buffer中平衡2~5分钟
6、膜在10ml新鲜配制的 Colorsubstrate solution 中避光孵育。显色期间摇动
7、中止反应 用TE-buffer或者双蒸水50ml洗5分钟展开