Deprecated: Required parameter $cat_id follows optional parameter $type in /data/ebiomall/systems/hong.php on line 2088
Deprecated: Required parameter $where follows optional parameter $tree_id in /data/ebiomall/systems/hlb.php on line 3505 Ossila/Source-Drain Deposition Mask for Low Density OFETs/30 micron channel length/E291_蚂蚁淘，【正品极速】生物医学科研用品轻松购|ebiomall 蚂蚁淘商城
Shadow masks for deposition of source drain contacts. Designed for use in the low density evaporation stack with our standard sized substrates of 20 x 15 mm. Each mask will work with up to 12 substrates, each with five OFETs to produce a total of 60 devices in a single evaporation.
Datasheet
Linear channels of width 1 mm with two designs available of either five identical channel lengths of 30 μm or variable channel lengths of 30, 40, 50, 60 and 80 μm (one per substrate)
Number of OFETs
60 (5 per substrate)
Channel length
E291: 30 μm E292: 30, 40, 50, 60, 80 μm (one each per substrate)
Channel width
1 mm
Contact pad size
1 mm x 1 mm
Mask thickness
35 µm
Channel bar tolerance
±10 µm
Mask material
Hard electroformed nickel
Left: Schematic of the the whole mask (see source-drain evaporation stack for details of how it fits with other layers).Right: Key dimensions for the small features on E291. The dotted line shows the outline of a substrate for reference.
Optical image of the variable width source-drain evaporation mask.
Optical image of the 30 µm width source-drain evaporation mask
The mask is designed in such a way that during the deposition of the gate electrodes on the corner of the substrate the metal should cover the edge of the substrate as well. This ensures conductivity between the metal electrodes and the p-doped silicon. If you find the edges of the substrate not to be conductive you must scratch the edges of the substrate to remove the insulating silicon oxide in correspondence with the corner where the gate electrode will be deposited.
Prefabricated OFET: details of the gate pad/doped silicon electrical contact.
To the best of our knowledge the technical information provided here is accurate. However, Ossila assume no liability for the accuracy of this information. The values provided here are typical at the time of manufacture and may vary over time and from batch to batch.
